Jensen MP6612i manual Connecting/Disconnecting Your Phone, Managing Incoming Calls, Call Transfer

MP6612i

NOTE: Not all Bluetooth phones and features are compatible with the MP6612i (i.e HFP and phone book access).

Connecting/Disconnecting Your Phone

When the phone is out of range of the head unit (approximately 100 feet), it will automatically disconnect.

Press and hold the BAND button (3) to manually reconnect the phone when entering the vehicle.

NOTE: You can only reconnect a paired device using the BAND button.

Managing Incoming Calls

When connected to a Bluetooth phone, the unit will mute audio output, pause CD play, and change to the Bluetooth screen when a call is received. An incoming phone number will appear on the screen below “Answer ?”. The call duration appears on the screen.

Answering an Incoming Call

To answer the call, press the button (5).

For best reception, speak loudly and clearly. To end the conversation, press

the button (6) button. The screen will display “Call Ended!” and then return to the previous mode.

Rejecting an Incoming Call

Press the button to reject an incoming call. The call will end and go to voice mail, if available.

Volume Control

To increase or decrease the volume level, turn the rotary encoder (5), or press the VOL buttons on the remote control.

Making an Outgoing Call

1. Press the button (5) to open the direct dial screen.

2.Use the 0-9, * and # keys on the remote control to input the phone number.

•Press the button (6) button to clear the last digit.

•Press and hold the button (6) button to clear the entire number and start over.

•Use the TUNE/TRACK >> or << buttons (19) to move the cursor and change an incorrect digit.

3. Press the button to dial the call.

NOTE: You can dial a number from any of the menu lists by

highlighting the number and pressing the button (5).

Press the button to end a call.

MP6612i
		P
			H
			O	TUNE / TRACK
			N
			E	/
				DISP	PTY
D				RADIO
				READY	CH/CAT
N
A			C
B		R		SCAN	AS
	S
MENU/ENTER-PRESS

1	2 INT	3 RPT	4 RDM	5 DN	6 UP	iPod
						Menu

Call Transfer
While talking, press the	button (5) to transfer an active call from the

head unit back to the mobile phone. “Call Transfer!” appears on the LCD.

Using Speed Dial

Storing a Number

1.Press the PHONE button (21) to access the Bluetooth menu.

2.With SPEED DIAL displayed at the top of the screen, turn the rotary encoder to choose the preset M1-M6 position for which you would like to store/edit a number.

3.Press the ENTER button (22) to confirm and access the input screen.

4.Use the rotary encoder to select the digit for each position, pressing the ENTER button after each entry. You can enter up to 20 digits on the first line.

NOTE: You can use the TUNE/TRACK >> or << buttons (19) to move the cursor and return to a position that needs to be changed.

5.After the last digit, press ENTER again to move to the second line.

22