Wireless ADSL Modem Router Setup Manual
How to Set Up and Test Basic Wireless Connectivity
Follow the instructions below to set up and test basic wireless connectivity. Once you have established basic wireless connectivity, you can enable security settings appropriate to your needs.
1.Log in to the wireless ADSL modem router at its default LAN address of http://192.168.0.1 with its default user name of admin and default password of password, or using whatever LAN address and password you have set up.
2.Click the Wireless Settings link in the main menu of the wireless ADSL modem router.
3.Note that the default SSID is NETGEAR.
Note: The SSID of any wireless adapters must match the SSID you configure in the 
wireless ADSL modem router. If they do not match, you will not get a wireless
connection.
4.Set the Region. Select the region in which the wireless interface will operate.
5.Click Apply to save your changes.
Note: If you are configuring the router from a wireless computer and you change the 
router’s SSID, channel, or security settings, you will lose your wireless
connection when you click Apply. You must then change the wireless settings of your computer to match the router’s new settings.
6.Configure and test your computers for wireless connectivity.
Program the wireless adapter of your computers to have the same wireless network name (SSID) as the wireless ADSL modem router. Check that they have a wireless link and are able to obtain an IP address by DHCP from the router.
Connecting the Router to the Internet |
v1.1,
