NETGEAR Wireless ADSL Modem Router manual Router’s Front Panel, LED Descriptions

Wireless ADSL Modem Router Setup Manual

The Router’s Front Panel

The wireless ADSL modem router front panel shown below contains status LEDs.

1 2 3 4 5

Figure 1-1

You can use the LEDs to verify various conditions. Table 1-1describes each LED.

Table 1-1.		LED Descriptions
Label		Activity	Description
1.	Power	On	Power is supplied to the router.
		Off	Power is not supplied to the router.
2.	Test	On	The system is initializing.
		Off	The system is ready and running.
		Blink -- Amber	Indicates ADSL training.
3.	Internet	On -- Green	The Internet port has detected a link with an attached device.
		Blink -- Green	Data is being transmitted or received by the Internet port.
4.	Wireless	On	Indicates that the Wireless port is initialized.
		Off	The Wireless Access Point is turned off.
		On (Green)	The Local port has detected a link with a 100 Mbps device.
		Blink (Green)	Data is being transmitted or received at 100 Mbps.
5.	LAN	On (Amber)	The Local port has detected a link with a 10 Mbps device.
		Blink (Amber)	Data is being transmitted or received at 10 Mbps.
		Off	No link is detected on this port.
1-2			Connecting the Router to the Internet

v1.1, 2006-2