E-IDE (ATAPI) Connection Set Up

10Connect a 4-pin power cable to the power supply connector of the CRW2200E marked “DC INPUT.”

Top

DC INPUT connector

Bottom

4-pin power cable

 

Notes

•There may be more than one 4-pin power cable available. Any one may be used.

•These connectors are D-shaped, so you can only connect the power cables in the correct orientation. Do not apply excessive force when making this connection.

11Tighten the four fastening screws on the side of the unit securely using a phillips screwdriver. (→P. 28 step 15)

12Attach the outer casing and all cables and peripheral devices of the computer and any screws that were removed. (→P. 29 step 16)

13Reconnect the computer to the AC outlet and turn it on. (→P. 29 step 17)

When you turn on the computer, make sure the LED on the panel of the

CRW2200E blinks in green, which indicates that it is reading disc information. (→P. 60)

46