Toshiba TLP-MT7E manual Press VOL/ADJ +/ to set, No signal power off, Power on

60

FULL MENU settings – Default setting (continued)

Remote control

Control panel

(Main unit side)

AUTO AUTO

KEYSTONE SET

When selecting “No signal power off” or “Power on” in step 3.

4-c	Press VOL/ADJ (+/-) to set.
	No signal power off
	OFF:	The power does not turn off automatically even if the no
		signal status continues.
	5 min.:	The power turns off automatically if the no signal status
		continues for approx. 5 min.

Power on

Manual: The power turns on by pressing the ON/STANDBY button.

Settings Adjustments

ON /

STANDBY

INPUT

KEYSTONE AUTO SET

FREEZE MUTE

PIP CALL RESIZE

MENU

VOL/ADJ

VOL/ADJ.

4-c

	ENTER	EXIT
4-c		5
	MENU	INPUT

Auto: When the power cord is plugged, the power turns on. (However, press the ON/STANDBY button when turns power off. )

5 EXIT After the settings are finished, press EXIT.

The menu screen disappears.

EXIT

ENTEREXIT

CT-90072

5

ON/STANDBY

&

TEMP LAMP ON

BUSY FAN

Notes

•If the power is turned off by pressing the ON/STANDBY button, the settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the settings are not stored in the memory.

•The settings of “Default setting” are applied to all the input sources. (It is impossible to store different settings for each input source.)