Toshiba TLP-MT7E manual Displaying Information, Press Call, Input, Lamp time

Displaying Information

35

Remote control

ON /

STANDBY

INPUT

KEYSTONE AUTO SET

FREEZE MUTE

PIP CALL RESIZE

CALL

MENU

VOL/ADJ

ENTEREXIT

CT-90072

Information on the input signal source, etc., can be displayed.

CALL Press CALL.

The information described below is displayed.

The information display turns off when the CALL button is pressed again.

Status display

Input – current input source

H-resolution – the horizontal resolution of the input signal (at Computer input) V-resolution – the vertical resolution of the input signal (at Computer input) H-frequency – the horizontal frequency of the input signal (at Computer input) V-frequency – the vertical frequency of the input signal (at Computer input) Video mode – the color mode of the video signal (at video, S-video input) Signal format– the formatting of the Y/PB/PR signal (at Y/PB/PR input)

Lamp time	– the elapsed using time of the lamp
Version	– the version of the firmware

Notes

•The information displayed is not refreshed even if it changes. To refresh the information, turn off the information display, then turn it back on.

•The information display turns off if any other operation is performed.

•The “Lamp time” shows an approximate time for lamp replacement. (It should not be used as a lamp warranty time counter.) If the time indicated here nears 1000, contact your store of purchase about obtaining a replacement lamp (TLPLX10, sold separately).

•The “Lamp time” can be reset when the lamp is replaced.

•The “Version” is the version of the control program used in the projector and is used for servicing, etc.

Operations