Toshiba TLP-MT7E After the settings are finished, press Exit, Speaker output, Channel select

FULL MENU settings – Audio (continued)

51

				Control panel
Remote control			(Main unit side)
				AUTO	AUTO
				KEYSTONE	SET
		ON /		VOL/ADJ.		4
INPUT		STANDBY
KEYSTONE	AUTO	SET
FREEZE	MUTE
PIP	CALL	RESIZE
				ENTER	EXIT	5
		MENU
	VOL/ADJ		4 MENU		INPUT
			5	ON/STANDBY
ENTER	CT-90072	EXIT
				TEMP LAMP	ON
				BUSY	FAN

4	Press VOL/ADJ (+/-) to adjust and set.
	Speaker output

When set to “Off”, no sound is produced from the speakers.

Channel select

L+R: The sound of the left and right channels is mixed and developed from the speakers.

L:To develop only left input audio signal from the speakers.

R:To develop only right input audio signal from the speakers.

Loudness

When set to “On”, the loudness effect is added to the speaker sound.

5 EXIT After the settings are finished, press EXIT.

The menu screen disappears.

EXIT

Notes

•If the power is turned off by pressing the ON/STANDBY button, the settings made are automatically stored in the memory. If the power cord is unplugged or if a power failure occurs while the projector is on, the settings are not stored in the memory.

•The “Audio” settings are applied to all the input sources. (It is impossible to change the settings for each input source.)

Settings	Adjustments
	&