Toshiba TLP-MT7E manual Correcting the keystone distortion, Press Auto Keystone, Main unit side

Correcting the keystone distortion

29

Remote control

Control panel

(Main unit side)

A picture may be expanded on the upper side if projected upward from the projector lifted up by the foot adjuster. The projector can correct this keystone distortion automatically.

Before correcting After correcting

AUTO

AUTO AUTO

KEYSTONE SET

KEYSTONE

ON /	VOL/ADJ.
STANDBY

INPUT

KEYSTONE AUTO SET

FREEZE MUTE

PIP CALL RESIZE

ENTER EXIT

MENU

VOL/ADJ

MENU INPUT

ON/STANDBY

ENTEREXIT

CT-90072

TEMP LAMP ON

AUTO

KEYSTONE

KEYSTONE

Notes

Press AUTO KEYSTONE.

The keystone distortion on the picture projected is automatically corrected.

The icon appears while the keystone correction is executing.

To correct further, make the “Keystone” adjustment on the menu. 38 52

Operations

BUSY FAN

•Due to digital correction processing, some of the information may dropped or the picture quality may be degraded depending on the keystone correction setting or the contents of the signal source.

•Keystone distortion is not corrected properly when the screen is not installed vertically. In this case, adjust from the menu screen.

Even if the projector is set horizontal, keystone distortion may occur if the screen is at an angle. In this case automatic correction is impossible.