Toshiba TLP-MT7E manual Floor-mounted projector placement Contents

Floor-mounted projector placement (continued) CONTENTS

1	Place the projector on a steady, level surface such as a table.
	To obtain proper screen projected, place the projector so that the projecting light hits the screen squarely.

17

Top view

Screen

90°

Side view

Screen

90°

connectionInstallation and

Point the lens straight at the center of the screen as above.	Place the projector horizontally so that the projecting
	light hits the screen squarely.

Determine the screen size projected on the screen.

2 The projection size depends on the distance between the lens and the screen.		• The values are approximations.
Adjust the projection size by changing the distances as shown below.		Projection size	a(m)
			Minimum	Maximum	b(cm)
	Projection size - 0.8660	(inches)
a (min.) =			(At maximum zoom) (At minimum zoom)
Screen	25.339	28	-	1.38	10
	Projection size - 0.6766
a (max.) =		32	1.23	1.58	12
	19.796	36	1.39	1.78	13
b = Projection size - (cm) x 0.143		42	1.62	2.09	15
		60	2.33	3.00	22
a: Distance between the lens and		80	3.12	4.01	29
b	the screen (m)	100	3.91	5.02	36
90°
		150	5.89	7.54	55
b: Distance between the lens height
		200	7.86	10.07	73
a	and the bottom of projection area
	(cm)	250	9.83	-	91

Continued