Toshiba TLP-MT7E manual Select the input source, Press the Input button repeatedly to select it

26

Projection on the screen (continued)

Operations

	Remote control			Control panel
				(Main unit side)
				AUTO	AUTO
				KEYSTONE	SET
3			ON /	VOL/ADJ.
			STANDBY
	INPUT
	KEYSTONE	AUTO	SET
	FREEZE	MUTE
	PIP	CALL	RESIZE
				ENTER	EXIT
			MENU
		VOL/ADJ
				MENU	INPUT
					3
				ON/STANDBY
	ENTER		EXIT
		CT-90072
				TEMP LAMP	ON
				BUSY	FAN

3	INPUT	Select the input source.
		Press the INPUT button repeatedly to select it.
		The icon of the input source selected appears.
	INPUT
		Y/PB/PR	Video	S-Video	Computer

Note

The types of input sources selected when the INPUT button is pressed repeatedly can be set from the menu screen. 38

(At shipping from factory, the projector is set so that the component signal source input to the COMPONENT IN connector and the video signal source input to the VIDEO jack can be selected.)

(Signal sent from the computer)

•If you project an image from a computer with an LCD screen while monitoring the image on the computer, the image may not be projected properly, depending on the computer model. In this case, turn off the computer display. For details on controlling the computer display, etc., refer to the computer’s manual and description on the software for the computer used.

•An image on a computer is displayed enlarged or reduced, so quality of the screen becomes a bit inferior.

•The projector can be also applied to DDC2B (Display Data Channel 2B). If your computer is applied to the DDC, start up your computer after turning on the projector.

Continued