Toshiba TLP-MT7E manual Obtained and hold down the foot adjuster release button

Projector placement angle adjustment CONTENTS

The tilt of the projector can be adjusted using the foot adjuster.

1	Lift the front of the projector until a tilt angle desired is
	obtained and hold down the foot adjuster release button.

The foot adjuster will stretch.

Release the button to lock in position.

Foot adjuster	Foot adjuster
release button

19

connectionInstallation and

2

Lift up Lower

Turn the foot adjuster to make fine adjustment of the height.

Turn clockwise to lift up.

Turn counterclockwise to lower.

Lift up Lower

Notes

•To put the foot adjuster back, hold down the foot adjuster release button and lower the front slowly.

•Be sure to hold the projector when putting the foot adjuster back so as not to let the front fall on your fingers.

•Do not tilt the projector at an angle exceeding the range adjustable by the foot adjusters, since the duration life of the lamp may be shortened.