Operation

You can load and eject a disc (as described below) only when the computer is turned on.

Loading a Disc

1

2

1Open the tray by pressing the Eject button on the CRW2200 drive’s front panel.2Place the disc onto the tray with its label or printing facing upward.

3Close the disc tray by pressing the Eject button again. You can also gently push it closed.

Load or unload the disc after the tray has fully opened. Do not push or pull the tray using excessive force. Doing so can damage the drive or the disc.

Ejecting a Disc

1

2

1Open the tray by pressing the Eject button on the CRW2200 drive’s front panel.

2Remove the disc from the tray.

3Close the disc tray by pressing the Eject button again. You can also gently push it closed.

50