Sony DHC-MD373 manual MD Deck, Optional components

Page 57

Playdoesnotstartfromthefirsttrack.

•Press PLAY MODE repeatedly until “PGM” or “SHUFFLE” disappears to return to normal play.

“—OVER—”appears.

•Keep pressing MD/CD .m to return to the desired playing position.

MD Deck

AnMDcannotbeinserted.

•Insert the MD with the arrow side up and the arrow pointing toward the deck.

Thecontrolsdonotwork.

•Replace the MD with a new one.

•Retry the operations after “TOC” turns off.

Playdoesnotstart.

•Replace the MD.

•Insert the MD and leave the system turned on for a few hours until the moisture evaporates.

•Press MD HS to start play.

Thesoundskips.

•Replace the MD.

•Try moving the system to a place without vibration (e.g., on top of a stable stand).

•Try moving the speakers away from the system, or placing them on separate stands.

When you listen to a track with bass sounds at high volume, the speaker vibration may cause the sound to skip.

•Insert the disc and wait for 10 to 20 minutes with the system turned on.

Playdoesnotstartfromthefirsttrack.

•Press PLAY MODE repeatedly until “PGM” or “SHUFFLE” disappears to return to normal play.

“—OVER—”appears.

•Keep pressing MD/CD .m to return to the desired playing position.

“OVER”lightsredduringrecording.

•Set the volume of the connected component lower.

Recordingoreditingwasdone,butthe

TOCisnotupdated.

•MD recording and editing contents are recorded to the MD when the MD is removed, so make sure you remove the MD after recording or editing (see pages 25 and 35).

Recordingisnotpossible.

•Remove the MD and slide the tab to close the slot (see page 25).

•Connect the optional A/V component properly (see pages 52 and 53).

•Switch to another sound source.

•Replace the MD with a recordable MD, or use the Erase Function to erase unnecessary tracks (see pages 37 – 40).

•Start recording over from the beginning.

ThesoundfromanMDyourecordedis toolow(ortoohigh).

• Readjust the recording level (see page 33).

Optional components

Thereisnosound.

•Refer to General item “There is no sound.” on page 56 and check the condition of the system.

•Connect the component properly (see pages

52 and 53) while checking:

–if the cords/cables are connected properly.

–if the cord/cable connectors are firmly inserted all the way.

•Turn on the connected component.

•Refer to the operating instructions included with the connected component and start playing.

Thesoundisdistorted.

• Adjust the recording level (see page 33).

Thesoundfromthecomponentconnected totheDIGITALOPTICALINjackisnot heard.

•Press FUNCTION repeatedly until “OPTICAL IN” appears.

continued

Additional Information

57

Page 56 Page 58
Image 57
Page 56 Page 58
Contents Mini Hi-Fi Component System Table of Contents Labelling the preset stations Starting recording with 6 seconds Prestored audio dataUsing the Radio Data System RDS Recording your favourite CD tracks on An MDHooking up the system Set up the AM loop aerial, then connect itConnect the speakers Connect the FM/AM aerialsInserting two R6 size AA batteries into the remote Connect the mains lead to a wall outletGetting Started TipSetting the time To change the preset timeIf you make a mistake Presetting radio stations To tune in a station with a weak signal Presetting radio stationsTo set another station to the exist preset number To erase a preset stationTo activate Power Saving Mode Saving the power in standby modePress Display when the system is off Press Display Clock display disappearsPlaying a CD To turn on the system, press ?/1powerPress CD Z and place a CD on the disc tray Press CD HSMD CD-MD Synchro Recording Recording a CD on anTo stop recording Before inserting an MDRecording a CD on an MD Playing an MDBefore pulling out the mains lead If the MD becomes full during recordingListening to the radio Preset TuningListening to non-preset radio Stations Recording fromListening to the radio Press zREC MD deck stands by for recording REC button lights redRecording starts To cancel Shuffle Play To cancel Repeat PlayPlaying CD tracks Repeatedly Repeat PlayProgramme Play Programming CD tracksPress H To check the total number of programmed tracksTo select the desired track using the remote Using the CD displayProgramming CD tracks To check the programme orderStop mode Labelling a CD Disc MemoCD Player Labelling a CD Checking the disc titlesPlaying MD tracks To cancel erasingErasing a disc title Erasing all disc titles stored System memoryYou can play all the tracks on an MD in random Programming MD tracksTips To programme additional tracks, repeat steps 3 Press HMD Deck Play Press .or repeatedly during Programme PlayUsing the MD display After recording When the source you record from is This system’s CD playerProtecting a recorded MD MD Deck Play/RecordingRecording on an MD Selecting the tracksCD-MD Synchro Recording Press ENTER/YES on the remoteManually Manual Recording Recording on an MDPress z REC MD Deck RecordingRecording on an MD manually Start playing the desired source CD, etc. to recordTime Machine Recording To stop Time Machine Recording Marking track numbers 4,5Press Function repeatedly until Tuner appears To cancel automatic track marking Press MENU/NO Press MD HSTracks following the added one are renumbered Making a space between tracks 3 seconds long To turn off Smart Space and Auto Cut functionsPress H to restart the recording Adjusting the recording level Recording starts When recording a CD, etc., start playing4,6 4,5 5 ,4,5 Monaural recordingTo return to stereo recording Mono lights upEditing functions Before you start editingBefore editing After editingName Function Labelling an MDDuring recording After recordingCopying a disc or track title Erasing recordingsChecking the titles Erasing the titlesErasing recordings Erasing all tracksPress ENTER/YES again All Erase ?? appearsErasing a portion of a track Erase Function 5,8, 9,11Repeat until point a is played correctly MD pausesTo cancel A-B Erase Moving recorded tracksMove Function To cancel moving To return to the track order before MoveDivide Function Combining recorded 4,6 5 ,4,5Dividing recorded tracks For example, to combine tracks 4 and 1, select To cancel combiningUndoing the last edit To cancel Undo functionUndo Function One of the following messages appearsMD Deck Editing/Sound Adjustment To cancel the Preset EqualizerReinforcing the bass sound Dbfb Press DbfbStations Station Name Labelling the presetPress CURSORt on the remote Press TUNER/BAND to select FM or AMReceiving RDS broadcasts What is the Radio Data System?Falling asleep to music Waking up to music5,8 To check the setting / activate the timer To change the settingTo cancel the timer Set the time to start playTune in the preset radio station see Press CLOCK/TIMER SET Timer recording radio programmesSet the time to start recording Insert a recordable MD or tapeTo check the setting / To use the timer Connecting a portable MD Etc Connecting optional A/V componentsConnecting the optional TC TX373 tape deck Connecting the audio cords not suppliedConnecting a CS/BS digital Tuner, etc Connecting external aerialsConnecting optional components FM aerialPrecautions System limitations of MDs General TroubleshootingOptional components MD DeckTroubleshooting Self-diagnosis DisplayTuner Messages Self-diagnosis Display SpecificationsInformation Parts descriptions for the remoteParts descriptions for the remote Playing CD 10, 16 an MD 12 IndexUndo Function Index

DHC-MD373 specifications

The Sony DHC-MD373 is a compact audio system that exemplifies Sony's commitment to high-quality sound and user-friendly design. Introduced as a versatile mini-system, the DHC-MD373 integrates a variety of playback options, catering to a wide array of musical preferences. This system features a sleek, modern design that easily fits into any living space, making it a popular choice for both casual listeners and audiophiles alike.

One of the standout features of the DHC-MD373 is its MiniDisc player, a technology that allows for high-quality digital audio recording and playback. The MiniDisc format provides superior sound reproduction compared to cassette tapes and offers greater durability and ease of use. The system also supports CD playback, including CD-R and CD-RW formats, broadening the range of audio sources that users can enjoy.

In addition to its physical media capabilities, the DHC-MD373 is equipped with AM/FM radio, enabling users to access their favorite radio stations. The system includes a built-in tuner with presets, making it easy to switch between different stations. It also features a tape deck for those who still cherish their cassette collections, further enhancing its versatility.

The audio performance of the DHC-MD373 is impressive, featuring advanced sound enhancement technologies. With a built-in equalizer, users can adjust sound settings to match their preferences or the acoustic requirements of their environment. The system's two-way speaker design delivers rich, full-bodied sound, ensuring that every note and detail is heard clearly.

For connectivity, the DHC-MD373 includes various inputs and outputs, allowing for easy integration with other audio devices. This feature promotes versatility, as users can connect external speakers, microphones, or other playback devices, extending the capabilities of the system. Additionally, its compact size and design allow for flexible placement, whether on a shelf or in an entertainment center.

In conclusion, the Sony DHC-MD373 is a highly functional mini audio system that combines traditional and modern audio technologies. With its MiniDisc playback, comprehensive radio capabilities, and robust sound quality, it provides an enjoyable listening experience for a diverse range of users. Its blend of performance, versatility, and design makes the DHC-MD373 an enduring choice in home audio systems. Whether for casual use or dedicated listening sessions, this system is built to impress.
Top Page Image Contents