Sony DHC-MD373 Set the time to start play, Press ?/1 to turn off the system, To cancel the timer

Page 49

4 Press ENTER/YES.

“ON” lights up, and the hour indication flashes.

5 Set the time to start play.

Press . or > repeatedly to set the hour, then press ENTER/YES.

The minute indication flashes.

Press . or > repeatedly to set the minute, then press ENTER/YES.

The hour indication flashes again.

6 Set the time to stop play following the above procedure.

7 Press . or > repeatedly to select the desired sound source.

The indication changes as follows:

tTUNER yCD PLAY T

tTAPE PLAY* yMD PLAY T

*Select this to use another component (the optional tape deck TC-TX373) as the sound source.

8 Press ENTER/YES.

The start time, the stop time, and the sound source appear in turn, before the original display returns.

9 Press ?/1 to turn off the system.

To change the setting

Start over from step 1.

To check the setting / activate the timer

Press CLOCK/TIMER SELECT, then press . or > until “SET DAILY” appears. Then, press ENTER/YES.

To cancel the timer

Press CLOCK/TIMER SELECT, then press . or > repeatedly until “TIMER OFF” appears. Then press ENTER/YES.

Tip

When you connect the optional tape deck TC-TX373 to the system, you can activate the tape deck using the Daily Timer function without setting the timer on the tape deck.

Notes

•You cannot activate Daily Timer and recording timer at the same time.

•Do not operate the system from the time the system turns on until the play starts (about 30 seconds before the preset time).

•If the system is on at the preset time, the set sound source starts playing.

•If you use another component (except for the optional tape deck TC-TX373), you must set the timer on both systems to the same time.

•You cannot use the components connected to the DIGITAL OPTICAL IN jack or LINE IN jack as the sound source for Daily Timer.

Other Features

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Mini Hi-Fi Component System Table of Contents Labelling the preset stations Starting recording with 6 seconds Prestored audio dataUsing the Radio Data System RDS Recording your favourite CD tracks on An MDHooking up the system Set up the AM loop aerial, then connect itConnect the speakers Connect the FM/AM aerialsInserting two R6 size AA batteries into the remote Connect the mains lead to a wall outletGetting Started TipTo change the preset time Setting the timeIf you make a mistake Presetting radio stations To tune in a station with a weak signal Presetting radio stationsTo set another station to the exist preset number To erase a preset stationTo activate Power Saving Mode Saving the power in standby modePress Display when the system is off Press Display Clock display disappearsPlaying a CD To turn on the system, press ?/1powerPress CD Z and place a CD on the disc tray Press CD HSMD CD-MD Synchro Recording Recording a CD on anTo stop recording Before inserting an MDRecording a CD on an MD Playing an MDBefore pulling out the mains lead If the MD becomes full during recordingListening to the radio Preset TuningRecording from Listening to non-preset radio StationsListening to the radio MD deck stands by for recording REC button lights red Press zRECRecording starts To cancel Shuffle Play To cancel Repeat PlayPlaying CD tracks Repeatedly Repeat PlayProgramme Play Programming CD tracksPress H To check the total number of programmed tracksTo select the desired track using the remote Using the CD displayProgramming CD tracks To check the programme orderLabelling a CD Disc Memo Stop modeCD Player Labelling a CD Checking the disc titlesPlaying MD tracks To cancel erasingErasing a disc title Erasing all disc titles stored System memoryYou can play all the tracks on an MD in random Programming MD tracksTips To programme additional tracks, repeat steps 3 Press HMD Deck Play Press .or repeatedly during Programme PlayUsing the MD display After recording When the source you record from is This system’s CD playerProtecting a recorded MD MD Deck Play/RecordingRecording on an MD Selecting the tracksCD-MD Synchro Recording Press ENTER/YES on the remoteManually Manual Recording Recording on an MDPress z REC MD Deck RecordingStart playing the desired source CD, etc. to record Recording on an MD manuallyTime Machine Recording To stop Time Machine Recording 4,5 Marking track numbersPress Function repeatedly until Tuner appears Press MENU/NO Press MD HS To cancel automatic track markingTracks following the added one are renumbered To turn off Smart Space and Auto Cut functions Making a space between tracks 3 seconds longPress H to restart the recording Recording starts When recording a CD, etc., start playing Adjusting the recording level4,6 4,5 5 ,4,5 Monaural recordingTo return to stereo recording Mono lights upEditing functions Before you start editingBefore editing After editingName Function Labelling an MDDuring recording After recordingCopying a disc or track title Erasing recordingsChecking the titles Erasing the titlesErasing recordings Erasing all tracksPress ENTER/YES again All Erase ?? appearsErasing a portion of a track Erase Function 5,8, 9,11Repeat until point a is played correctly MD pausesMoving recorded tracks To cancel A-B EraseMove Function To return to the track order before Move To cancel movingDivide Function 4,6 5 ,4,5 Combining recordedDividing recorded tracks For example, to combine tracks 4 and 1, select To cancel combiningUndoing the last edit To cancel Undo functionUndo Function One of the following messages appearsMD Deck Editing/Sound Adjustment To cancel the Preset EqualizerReinforcing the bass sound Dbfb Press DbfbStations Station Name Labelling the presetPress CURSORt on the remote Press TUNER/BAND to select FM or AMReceiving RDS broadcasts What is the Radio Data System?Waking up to music Falling asleep to music5,8 To check the setting / activate the timer To change the settingTo cancel the timer Set the time to start playTune in the preset radio station see Press CLOCK/TIMER SET Timer recording radio programmesSet the time to start recording Insert a recordable MD or tapeTo check the setting / To use the timer Connecting a portable MD Etc Connecting optional A/V componentsConnecting the optional TC TX373 tape deck Connecting the audio cords not suppliedConnecting a CS/BS digital Tuner, etc Connecting external aerialsConnecting optional components FM aerialPrecautions System limitations of MDs General TroubleshootingOptional components MD DeckSelf-diagnosis Display TroubleshootingTuner Messages Self-diagnosis Display SpecificationsInformation Parts descriptions for the remoteParts descriptions for the remote Playing CD 10, 16 an MD 12 IndexUndo Function Index

DHC-MD373 specifications

The Sony DHC-MD373 is a compact audio system that exemplifies Sony's commitment to high-quality sound and user-friendly design. Introduced as a versatile mini-system, the DHC-MD373 integrates a variety of playback options, catering to a wide array of musical preferences. This system features a sleek, modern design that easily fits into any living space, making it a popular choice for both casual listeners and audiophiles alike.

One of the standout features of the DHC-MD373 is its MiniDisc player, a technology that allows for high-quality digital audio recording and playback. The MiniDisc format provides superior sound reproduction compared to cassette tapes and offers greater durability and ease of use. The system also supports CD playback, including CD-R and CD-RW formats, broadening the range of audio sources that users can enjoy.

In addition to its physical media capabilities, the DHC-MD373 is equipped with AM/FM radio, enabling users to access their favorite radio stations. The system includes a built-in tuner with presets, making it easy to switch between different stations. It also features a tape deck for those who still cherish their cassette collections, further enhancing its versatility.

The audio performance of the DHC-MD373 is impressive, featuring advanced sound enhancement technologies. With a built-in equalizer, users can adjust sound settings to match their preferences or the acoustic requirements of their environment. The system's two-way speaker design delivers rich, full-bodied sound, ensuring that every note and detail is heard clearly.

For connectivity, the DHC-MD373 includes various inputs and outputs, allowing for easy integration with other audio devices. This feature promotes versatility, as users can connect external speakers, microphones, or other playback devices, extending the capabilities of the system. Additionally, its compact size and design allow for flexible placement, whether on a shelf or in an entertainment center.

In conclusion, the Sony DHC-MD373 is a highly functional mini audio system that combines traditional and modern audio technologies. With its MiniDisc playback, comprehensive radio capabilities, and robust sound quality, it provides an enjoyable listening experience for a diverse range of users. Its blend of performance, versatility, and design makes the DHC-MD373 an enduring choice in home audio systems. Whether for casual use or dedicated listening sessions, this system is built to impress.
Top Page Image Contents