Sony DHC-MD373 manual Self-diagnosis Display, Troubleshooting, Tuner

Page 58

Troubleshooting (continued)

Tuner

Severehumornoise/stationscannotbe

received.

Set the proper band and frequency (see page 7).

Connect the aerial properly (see page 4).

Find a place and an orientation that provide good reception, then set up the aerial again. If you cannot obtain good reception, we recommend you connect a commercially available external aerial.

The supplied FM lead aerial receives signals along its entire length, so make sure you extend it fully.

Locate the aerials as far away from the speaker cords as possible.

Consult your nearest Sony dealer if the supplied AM aerial has come off the plastic stand.

Try turning off surrounding electrical equipments.

AstereoFMprogramcannotbereceived instereo.

Press STEREO/MONO until “STEREO” appears in the display.

See “Severe hum or noise/stations cannot be received.”, and check the aerial condition.

Cyclicalstaticnoiseisheardwhile recordingonanMD.

Adjust the aerial orientation and position until the noise stops.

If the system still does not operate properly after performing the above measures, reset the system as follows:

Press the RESET switch on the rear panel using a ball point pen etc.

The system is reset to the factory settings. All the settings you made such as the preset stations, clock, timer and CD disc titles are cleared and must be set again.

Self-diagnosis Display

This system has a Self-diagnosis display function to let you know if there is a system malfunction. The display shows a code made up of three letters and a message alternately to show you the problem. To solve the problem refer to the following list. If any problem persists, consult your nearest Sony dealer.

C11/Protected

The MD is protected against erasure.

cRemove the MD and slide the tab to close the slot (page 25).

C12/CannotCopy

You tried to record a CD or MD with a format that the system does not support, such as a CD- ROM.

cRemove the disc and turn off the system once, then turn it on again.

C13/RECError

Recording could not be performed properly. cMove the system to a stable place, and start

recording over from the beginning.

The MD is dirty or scratched, or the MD does not meet the standards.

cReplace the MD and start recording over from the beginning.

C13/ReadError

The MD deck cannot read the disc information properly.

cRemove the MD once, then insert it again.

C14/TocError

The MD deck cannot read the disc information properly.

cReplace the MD.

cErase all the recorded contents of the MD using the All Erase function on page 38.

58

Image 58
Contents Mini Hi-Fi Component System Table of Contents Using the Radio Data System RDS Starting recording with 6 seconds Prestored audio dataLabelling the preset stations Recording your favourite CD tracks on An MDConnect the speakers Set up the AM loop aerial, then connect itHooking up the system Connect the FM/AM aerialsGetting Started Connect the mains lead to a wall outletInserting two R6 size AA batteries into the remote TipTo change the preset time Setting the timeIf you make a mistake Presetting radio stations To set another station to the exist preset number Presetting radio stationsTo tune in a station with a weak signal To erase a preset stationPress Display when the system is off Saving the power in standby modeTo activate Power Saving Mode Press Display Clock display disappearsPress CD Z and place a CD on the disc tray To turn on the system, press ?/1powerPlaying a CD Press CD HSTo stop recording Recording a CD on anMD CD-MD Synchro Recording Before inserting an MDBefore pulling out the mains lead Playing an MDRecording a CD on an MD If the MD becomes full during recordingPreset Tuning Listening to the radioRecording from Listening to non-preset radio StationsListening to the radio MD deck stands by for recording REC button lights red Press zRECRecording starts Playing CD tracks To cancel Repeat PlayTo cancel Shuffle Play Repeatedly Repeat PlayPress H Programming CD tracksProgramme Play To check the total number of programmed tracksProgramming CD tracks Using the CD displayTo select the desired track using the remote To check the programme orderLabelling a CD Disc Memo Stop modeCD Player Checking the disc titles Labelling a CDErasing a disc title To cancel erasingPlaying MD tracks Erasing all disc titles stored System memoryProgramming MD tracks You can play all the tracks on an MD in randomMD Deck Play To programme additional tracks, repeat steps 3 Press HTips Press .or repeatedly during Programme PlayUsing the MD display Protecting a recorded MD When the source you record from is This system’s CD playerAfter recording MD Deck Play/RecordingCD-MD Synchro Recording Selecting the tracksRecording on an MD Press ENTER/YES on the remotePress z REC Recording on an MDManually Manual Recording MD Deck RecordingStart playing the desired source CD, etc. to record Recording on an MD manuallyTime Machine Recording To stop Time Machine Recording 4,5 Marking track numbersPress Function repeatedly until Tuner appears Press MENU/NO Press MD HS To cancel automatic track markingTracks following the added one are renumbered To turn off Smart Space and Auto Cut functions Making a space between tracks 3 seconds longPress H to restart the recording Recording starts When recording a CD, etc., start playing Adjusting the recording level4,6 To return to stereo recording Monaural recording4,5 5 ,4,5 Mono lights upBefore editing Before you start editingEditing functions After editingDuring recording Labelling an MDName Function After recordingChecking the titles Erasing recordingsCopying a disc or track title Erasing the titlesPress ENTER/YES again Erasing all tracksErasing recordings All Erase ?? appearsRepeat until point a is played correctly 5,8, 9,11Erasing a portion of a track Erase Function MD pausesMoving recorded tracks To cancel A-B EraseMove Function To return to the track order before Move To cancel movingDivide Function 4,6 5 ,4,5 Combining recordedDividing recorded tracks To cancel combining For example, to combine tracks 4 and 1, selectUndo Function To cancel Undo functionUndoing the last edit One of the following messages appearsReinforcing the bass sound Dbfb To cancel the Preset EqualizerMD Deck Editing/Sound Adjustment Press DbfbPress CURSORt on the remote Labelling the presetStations Station Name Press TUNER/BAND to select FM or AMWhat is the Radio Data System? Receiving RDS broadcastsWaking up to music Falling asleep to music5,8 To cancel the timer To change the settingTo check the setting / activate the timer Set the time to start playSet the time to start recording Timer recording radio programmesTune in the preset radio station see Press CLOCK/TIMER SET Insert a recordable MD or tapeTo check the setting / To use the timer Connecting the optional TC TX373 tape deck Connecting optional A/V componentsConnecting a portable MD Etc Connecting the audio cords not suppliedConnecting optional components Connecting external aerialsConnecting a CS/BS digital Tuner, etc FM aerialPrecautions System limitations of MDs Troubleshooting GeneralMD Deck Optional componentsSelf-diagnosis Display TroubleshootingTuner Messages Specifications Self-diagnosis DisplayParts descriptions for the remote InformationParts descriptions for the remote Index Playing CD 10, 16 an MD 12Index Undo Function

DHC-MD373 specifications

The Sony DHC-MD373 is a compact audio system that exemplifies Sony's commitment to high-quality sound and user-friendly design. Introduced as a versatile mini-system, the DHC-MD373 integrates a variety of playback options, catering to a wide array of musical preferences. This system features a sleek, modern design that easily fits into any living space, making it a popular choice for both casual listeners and audiophiles alike.

One of the standout features of the DHC-MD373 is its MiniDisc player, a technology that allows for high-quality digital audio recording and playback. The MiniDisc format provides superior sound reproduction compared to cassette tapes and offers greater durability and ease of use. The system also supports CD playback, including CD-R and CD-RW formats, broadening the range of audio sources that users can enjoy.

In addition to its physical media capabilities, the DHC-MD373 is equipped with AM/FM radio, enabling users to access their favorite radio stations. The system includes a built-in tuner with presets, making it easy to switch between different stations. It also features a tape deck for those who still cherish their cassette collections, further enhancing its versatility.

The audio performance of the DHC-MD373 is impressive, featuring advanced sound enhancement technologies. With a built-in equalizer, users can adjust sound settings to match their preferences or the acoustic requirements of their environment. The system's two-way speaker design delivers rich, full-bodied sound, ensuring that every note and detail is heard clearly.

For connectivity, the DHC-MD373 includes various inputs and outputs, allowing for easy integration with other audio devices. This feature promotes versatility, as users can connect external speakers, microphones, or other playback devices, extending the capabilities of the system. Additionally, its compact size and design allow for flexible placement, whether on a shelf or in an entertainment center.

In conclusion, the Sony DHC-MD373 is a highly functional mini audio system that combines traditional and modern audio technologies. With its MiniDisc playback, comprehensive radio capabilities, and robust sound quality, it provides an enjoyable listening experience for a diverse range of users. Its blend of performance, versatility, and design makes the DHC-MD373 an enduring choice in home audio systems. Whether for casual use or dedicated listening sessions, this system is built to impress.