Philips DVDR1500 warranty Remote Control settings, Record settings

Page 35

Low Power Standby

If Low Power Standby is ‘On,’ the Recorder will consume minimum power in standby mode. Factory setting is ‘Off.’

Note:

When the Recorder is in low power standby mode:

-the signal of the equipment connected to the inputs will not be passed through to the TV outputs,

-the Display will be Off,

-the Standby indicator on the Recorder will still light up in standby mode.

Features

Access control

 

Adapt disc format

 

Status box

 

Low power standby

Off

Auto resume

 

PBC

 

Autoresume

The Autoresume setting only applies to the last 20 pre- recorded DVD Video and Video CD discs, you played. If Auto resume is ‘On,’ playback will start from the point where it stopped the last time the disc played. When Auto resume is ‘Off,’ the Recorder will start playing from the beginning of a disc. In this case, you can still resume from the last point it stopped when appears on the TV screen by pressing 2 PLAY. Factory setting is ‘On.’

PBC

This feature allows you to disable or enable the PBC (Playback Control) menu of Video CDs. See ‘Playback’ - ‘Special VCD features.’ Factory setting is ‘On.’

Remote Control settings

Key sound

The Recorder beeps each time you press a button on the Recorder or remote control.

Select ‘Off’ to disable this sound. The factory setting is On.

Remote control used

If you want to use the remote control of a Philips DVD player instead of the standard DVD Recorder remote control to work the DVD Recorder, select ‘DVD Player.’ Factory setting is ‘DVD Recorder.’

Record settings

Record mode

By selecting a recording mode you define the picture quality of recordings and the maximum recording time for a disc.

Mode

Picture quality

Total recording

 

 

time

HQ

best possible

60 minutes

(High Quality)

picture quality

 

SP

same picture quality

 

(Standard Play)

pre-recorded as a

120 minutes

 

DVD

 

LP

S-VHS

180 minutes

(Long Play)

picture quality

 

EP

better than VHS

240 minutes

(Extended Play)

picture quality

 

 

 

 

You can only play a disc in the mode in which it was recorded.

•In the Record settings menu, select ‘Record mode.’

Record settings

Record mode

SP

Auto chapters

On

LP/EP rec mode

Stndrd

To exit press

SYSTEM MENU

•Select the recording mode by pressing the t or u (left or right cursor) buttons.

•Confirm your selection by pressing the OK button.

•Press SYSTEM MENU to return to the previous menu.

Auto chapters

If Auto chapters is ‘On,’ every five to six minutes a chapter marker (beginning of a new chapter) is inserted during recording. This enables easy navigation through a title during playback. Or, you can manually insert chapter markers after recording. (see ‘Managing disc content’ - ‘Edit in playback mode’)

LP/EP recording mode

When recording LP or EP, select the ‘Sport’ setting to optimize the video recording for images that contain fast movement, like sports programs. The setting does not influence recording when using HQ or SP mode.

The factory setting is ‘Standard.’

English

OPERATION 35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents For fast help, call us first Page Warranty Verification General Information Important safety instructionsFor Customer Use Laser safetyPage English Françaisx Español English Contents Playback OperationRecording Glossary Access controlManaging disc content TroubleshootingDVD Recorder IntroductionRemote control Box contentsPlacement Cleaning discsConnections back of your DVD Recorder InstallationConnecting to the antenna or Cable TV signal Connecting to a TVDigital Multi-channel sound Connecting to audio EquipmentVideo Y/C connection Video Cvbs connectionConnecting to a receiver with two channel analog stereo Connecting to other equipment optionalConnecting to a receiver equipped with Dolby Pro Logic Connecting to a TV with a Dolby Pro Logic decoderCamcorder connection Power supplyConnections Front Your DVD Recorder optional Audio language First time setup Initial setupManual setting Menu languageAutomatic TV Channel Search TV ShapeManual recording Switching onQuick start Press u right cursor Timer programmingTimer programming with ’VCR Plus+’ Timer programming without VCR Plus+To stop playback at any time, press 9 Stop Playing a pre-recorded DVD- Video discPlaying a recordable DVD+RW disc Point at which you it stopped the last time byFront of Recorder Functional overviewSpace free around the vents RF connection to antenna/cable TV signalBack of Recorder OUT Coax coaxialDisplay Delete last entry/clear a Timer Acknowledge menu selection CH Alternate Channel switches to previous TV channelDisplays the Timer menu Switches between different values in a menuLoading discs OperationImportant notes for operation Disc typesSystem menu bar On-screen display informationDiscs unsuitable for recording or playing User preference menu icons User preference menu operationTemporary feedback icons Disc status icons Status boxTuner info box Disc type iconsTimer info box Other title Index Picture ScreenBlack level shift Setting user preferencesPicture settings User preferencesFeature settings Language settingsRecord settings Remote Control settingsVCR Plus+ ch InstallationUpdate/Re-install TV channels Add and delete TV channelsManually Time/Date AutomaticManual recording of a TV channel RecordingBefore you start recording Manual audio control Timer recording with ’VCR Plus+’ TProessTexitIMERPress u right cursor to select Ch If a timer recording is incorrectTimer recording without ‘VCR Plus+’ SolutionPress Clear How to check or alter a Timer RecordingHow to clear a timer block How to stop a Time Recording in progressTo stop play at any time, press 9 Stop PlaybackPlaying a pre-recorded DVD Video disc Playing a Super Video CDMoving to another chapter/index General featuresMoving to another title/track Search Slow MotionStill Picture and Frame-by-Frame Playback Time search RepeatRepeat A-B ScanMenus on the disc Special DVD-Video featuresZoom Changing the audio language Special VCD featuresCamera Angle Subtitles Playback Control PBCRepeat track/disc Playing an Audio CDPause Scan Activating/deactivating the child lock Access controlAuthorizing discs when Child Lock is activated Child Lock DVD and VCDInsert the disc Parental Level DVD-Video onlyLocking Discs that were formerly Unlocked Activating/Deactivating Parental ControlChanging the 4-digit code CountryDisc Information Screen Managing disc content DVD+RW onlyTitle settings Erase disc Disc SettingsDisc name ProtectionEdit during playback Favorite Scene SelectionAppend recording Inserting Chapter Markers during recordingDivide a title Symptom Remedy TroubleshootingNo new title can be recorded Two languages are ‘mixed’ when recording From a stereo VCRInstructions Diagnosis programSystem limitations Term Explanation GlossaryTV system VideoTitle TruSurroundEnglish Page DVD+REWRITABLE Disc Format SpecificationsPhilips
Top Page Image Contents