Country
1Press SYSTEM MENU.
2Press t (left cursor) to select in the system menu bar.
3Press w (down cursor) repeatedly to select , then press u (right cursor).
4Access control will be selected in the features menu . Press u (right cursor).
5Enter the four digit code using the
6Move to Change country using w (down cursor.)
7 Press u (right cursor.)
8 Select the country for which your disc is coded using w/v (down or up cursor.) See the disc case for details on whether it has Parental Level settings for specific countries. If it does not, this procedure is not necessary.
9 Press OK or t (left cursor) to confirm. Press SYSTEM MENU to exit the menu.
Changing the 4-digit code
1Press SYSTEM MENU.
2Press t (left cursor) to select in the system menu bar.
3Press w (down cursor) repeatedly to select , then press u (right cursor).
4Access control will be selected in the features menu . Press u (right cursor).
5Enter the old
6 Move to Change code using w (down cursor.)
7 Press the u (right cursor) button.
8 Enter the new
reconfirm by pressing OK.
10 Press SYSTEM MENU to exit the menu.
Note: If you forgot your code, press 9 STOP four times at step 5, then press OK. Access control is now off. You can enter a new code as described above.
English
ACCESS CONTROL 53