Playback
Playing a pre-recorded DVD-
Video disc
Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the Recorder may not respond to all operating commands. When this occurs, please refer to the instructions in the disc jacket or case.
When an appears in the top left corner of the TV screen, the operation is not permitted by the Recorder or the disc.
1Insert a
Preferences’) playback starts automatically from the point at which it stopped, the last time the disc played.
‰When ‘Autoresume’ is ‘Off’ the disc will play from the start of the disc. You can resume play from
the point at which you it stopped the last time by
pressing 2 PLAY shortly. While appears in the top left corner of the TV screen. When pressing
2 PLAY at beginning of disc playback an “X” may show on the screen
‰The currently playing title and chapter number are displayed will appear on the Recorder display. The elapsed playing time appears also.
Notes:
-Since it is usual DVD movies are released at different times in different regions of the world, all players have region codes, and discs can have an optional region code. If you load a disc that has a different region code, than your Recorder, you will see the region code notice on the screen. The disc will not play, and should be unloaded.
-The region code of this Recorder is one (1).
1 This is stated on a label on the back of your Recorder.
-Regional coding is not applicable for DVD+RW discs.
2The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical button; if not, use the w/v/u/t (down/up/right/left cursor) buttons to highlight your selection, then press OK.
Note:
During playback you can display and enter the DVD disc menu by pressing DISC MENU.
3To stop play at any time, press 9 STOP.
‰ The default screen will appear, giving information about the current status of the Recorder.
Playing a (Super) Video CD
1Insert a (Super) Video CD.
‰ When ‘Autoresume’ is ‘On’ (see ‘User
Preferences’), playback starts automatically from the point at which it stopped the last time the disc played.
‰The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical button.
2To stop play at any time, press 9 STOP. ‰ The default screen will appear.
English
PLAYBACK 43