14 Hookups (cont’d)
Connecting to a TV and a
supports Dolby DigitalTM, MPEG2, or Digital Theater System
Receiver
(example only)
Back of TV
(example only)
3
MAINS
1
COAXIAL DIGITAL |
|
AUDIO IN | VIDEO IN |
1 2
|
| SURROUND | CENTER | FRONT |
|
|
|
|
|
| AUDIO OUT |
|
| L |
| 1 |
|
|
|
PCM/MPEG2/Dolby Digital/DTS | L |
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
| R |
| R |
| 2 |
|
|
|
|
|
|
|
|
|
|
|
| |
COAXIAL | OPTICAL | SURROUND | SUB WF | FRONT | AUDIO CVBS | Pr/Cr | Pb/Cb | Y | |
MULTICHANNEL AUDIO OUT | OUT |
| VIDEO OUT |
|
| ||||
|
|
|
|
| |||||
PROGRESSIVE SCAN OUT
Pr/Cr | Pb/Cb | Y |
|
|
|
|
|
|
Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks (COAXIAL or OPTICAL) to the corresponding digital audio in jack on your Stereo Receiver. You only need one connection, so you will not use both jacks. Use a digital audio cable (not supplied).
2
Connect one of the yellow CVBS VIDEO OUT jacks of the DVD Player to the corresponding VIDEO IN jack on your TV. Or, use the
11.You only need one video connection.
3
Connect the DVD Player’s power cord to the MAINS jack on the rear of the DVD Player. Connect the power cords of the DVD Player and the TV to the power outlet. Turn on the power of the TV and the DVD Player.
4
Set the TV to the correct Video In channel. These channels often are near channel 00. See your TV manual. Or, change TV channels until you see the DVD logo on the TV screen.
Set your Stereo Receiver to the correct Audio In channel or sound source. Refer to the Stereo’s manual.
5
Set the DVD Player’s digital output. Details are on page 43.
Helpful Hints
•If your Digital Output setting does not match your Stereo’s capabilities, the Stereo may produce a strong, distorted sound or no sound at all.
•Six Channel Digital Surround Sound via digital connection can only be obtained if your Stereo has a Digital Multichannel Decoder.
•You may connect a subwoofer and speakers to the corre- sponding MULTICHANNEL AUDIO OUT jacks on the DVD Player. Follow the instructions supplied with the subwoofer and your Receiver.
•Your Stereo must support MPEG2, Dolby DigitalTM or Digital Theater System (DTS). Check the Stereo’s manual.