Philips DVP3144K, DVP3142KM/78 quick start Optional connections

	Optional connections
Connecting to an stereo	Connecting to a digital AV
system	receiver

English

STEREO

AUDIO

IN

DIGITAL

	DIGITAL	TV OUT
	OUT
AUDIO OUT	COAXIAL	COMPONENT VIDEO OUT

AV Receiver

AUDIO

IN

DIGITAL

	DIGITAL	TV OUT
	OUT
AUDIO OUT	COAXIAL	COMPONENT VIDEO OUT

Stereo system has right/ left Audio In jacks

Receiver has a PCM, Dolby Digital or MPEG decoder

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television.

BUse the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable supplied).

ASelect one of the video connections (CVBS VIDEO IN or COMPONENT VIDEO IN) depending on the options available on your television.

BConnect the COAXIAL jack of the DVD player to the corresponding Digital Audio In jack on your receiver (cable not supplied).

CSet the DVD player’s digital output to PCM-Only or ALL depending on the capabilities of your receiver (see page 33 {Digital Output}).

Tip:

– If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

TIPS: Before making or changing any connections, make sure that all the devices are disconnected from the power outlet.

13

01-43_dvp3142K_55_eng2.indd 13 2007-06-18 10:28:15 AM