Philips DVP3146, DVP3747X/94 quick start Digital Output Night Mode, All, Pcm, Off, Down Sampling

DVD Menu Options (continued)

Digital Output Night Mode

Select this if you connect to a multichannel decoder/receiver.

AIn ‘Audio’, press S T to select { Digital Output }, then press X.

{All }

Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2).

{PCM }

Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).

{Off }

To deactivate the digital audio output. For example, if you use the FRONT (L/R) AUDIO OUT sockets to connect to a TV or stereo system.

BUse S T to select a setting and press OK to confirm.

Tips:

–If { Digital Output } is set to { All }, all audio settings except MUTE are invalid.

–If { Digital Output } is set to { All } while playback MPEG, MP3/WMA fi les, the player will output PCM signals.

This mode optimizes playback of sound at low volume. High volume outputs will be softened and low volume outputs are brought upward to an audible level.

AIn ‘Audio’, press S T to select { Night Mode }, then press X.

{On }

Select this to set low volume output. This feature is only available for movie discs with Dolby Digital mode.

{Off }

Turns off night mode feature. Select this to enjoy the surround sound with its full dynamic range.

BUse S T to select a setting and press OK to confirm.

Down Sampling

You can enable and disable the digital signal for better sound output quality.

AIn ‘Audio’, press S T to select { Down Sampling }, then press X.

{On }

Playback a disc recorded at the sampling rate of 48kHz.

{Off }

Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in Stereo-Classic (Flat) mode.

BUse S T to select a setting and press OK to confirm.

English

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

33

dvp3146-3747_94_eng.indd 33 2007-09-04 2:24:47 PM