Philips DVP3120K quick start English Analog Output, Digital Audio Setup

DVD Menu Options (continued)

English

Analog Output

This option allows you to set the stereo analog output of your DVD player.

AIn ‘Audio Setup Page’, press S T to select { Analog Output }, then press X.

{Stereo }

Select this option when output delivers sound from only the two front speakers.

{LT/RT }

Select this option if your DVD player is connected to a Dolby Pro Logic decoder.

{V SURR }

Allows the DVD player to use virtual surround sound effects.

BUse S T to select a setting and press OK to confirm.

Digital Audio Setup

The options included in Digital Audio Setup are: {Digital Output} and {LPCM Output}.

AIn ‘Audio Setup Page’, press S T to

select { Digital Audio Setup }, then press X.

BPress S T to select an item, then press X to access.

CUse S T to select a setting and press OK to confirm.

Digital Output

Set the Digital Output according to your optional audio equipment connection.

{All }

Select this if the connected device has a built-in multichannel decoder that supports one of the multichannel audio format (Dolby Digital, MPEG-2).

{PCM Only }

Select this if the connected device is not capable of decoding multichannel audio. The DVD player will convert the Dolby Digital and MPEG-2 multichannel signals to PCM (Pulse Code Modulation).

{Off }

To deactivate the digital audio output. For example, if you use the AUDIO OUT sockets to connect to a TV or stereo system.

LPCM Output

If you connect the DVD player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’.

{48K }

Playback a disc recorded at the sampling rate of 48kHz.

{96K }

Playback a disc recorded at the sampling rate of 96kHz. This rate can only be achieved in Stereo-Classic (Flat) mode.

Tip:

–Discs are recorded at a certain sampling

rate. The higher the sampling rate, the better sound quality. LPCM Output can be selected only when PCM Only is activated.

TIPS: The underlined option is the factory default setting.

Press W to go back to previous menu item. Press SETUP to exit the menu item.

32

01-43_dvp3120K_98_eng1.indd 32 2007-07-25 1:46:59 PM