•MP3: 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz 48 kHz
•WMA: 44.1 kHz, 48 kHz
•Constant bit rate:
•MP3: 8 kbps - 320 kbps
•WMA: 32 kbps - 192 kbps
Main unit
•Dimensions (W x H x D): 360 x 42 x 209 (mm)
•Net Weight: 1.28 kg
Power
•Power supply rating: 230 V~; 50 Hz
•Power consumption: < 9 W
•Power consumption in standby mode: < 0.4 W
Accessories supplied
•Remote control and one battery
•Audio/Video cables
•User Manual
•Two microphones
Laser specification
•Type: Semiconductor laser InGaAIP (DVD),
AIGaAs (CD)
•Wave length: 658 nm (DVD), 790 nm
(CD)
•Output Power: 7.0 mW (DVD), 10.0 mW
(VCD/CD)
•Beam divergence: 60 degrees
6 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the player.
To keep the warranty valid, never try to repair the player yourself.
If you have problems using this player, check the following points before you request service. If you still have a problem, register your player and get support at www.philips.com/support.
If you contact Philips, you will be asked for the model and serial number of this player.The model number and serial number are on the back of this player.Write the numbers here: Model No. __________________________
Serial No. ___________________________
No picture.
•Refer to the TV user manual for how to select the correct video input channel.
•If you have turned on the progressive scan or changed a TV system setting, switch back to the default setting: 1) Press to open the disc compartment. 2) Press DISC MENU (for progressive scan) or SUBTITLE (for TV system).
No sound output from the TV.
•Make sure that the audio cables are correctly connected between this player and the TV.
No sound during DivX video playback.
•The audio codes are not supported.
No audio output from the loudspeakers of the connected external audio device (for example, stereo system, amplifier receiver).
•Make sure that the audio cables or coaxial cable are correctly connected.
•Switch the external audio device to correct audio input source.
EN 15