Find the correct viewing channel
1Press 2 to turn on the DVD player.
2Turn on the TV and switch to the correct
•You may go to the lowest channel on the TV, then press the Channel Down button on the TV remote control until you see the Video In channel.
•You may press ° button repeatedly on the TV remote control.
•Usually this channel is between the lowest and highest channels and may be called FRONT, A/V IN, VIDEO, etc..
Tip
•See the TV user manual on how to select the correct input on the TV.
•If the audio output of this DVD player is routed to other audio device (such as audio system or receiver), turn on the audio device to the appropriate audio input channel. Refer to the device user manual for details.
Select menu display language
Note
•You can skip this setting if this DVD player is connected to a HDMI CEC compliant TV. It switches automatically to the same OSD menu language as per your TV setting.
1 Press SETUP.
[ General Setup ] menu is displayed.
2Select [ OSD Language ], then press B.
General Setup
Disc Lock | Auto (Eng) |
OSD Language | English |
Sleep Timer | Français |
Auto Standby | Deutsch |
DivX(R) VOD Code | Italiano |
| Español |
| Português |
| Nederlands |
•The language options are different depending on your country or region. It may not correspond to the illustration shown here.
3Press vV to select a language, then press OK.
Tip
•You can set the default language for DVD audio and disc menu, see chapter ‘Adjust settings’ - [ Preferences ] for details.
14EN