Use Philips EasyLink
The DVD player supports Philips EasyLink, which uses the HDMI CEC (Consumer Electronics Control) protocol. EasyLink- compliant devices that are connected through HDMI connectors can be controlled by a single remote control.
Philips does not guarantee 100% interoperability with all HDMI CEC devices.
1Turn on the HDMI CEC operations on the TV and other connected devices. See TVs/ devices manual for details.
2You can now enjoy the following Philips EasyLink controls.
One-touch play
When you press the STANDBY button, it turns on the TV and this DVD player, then video disc play starts.
•To enable
One-touch standby
When you press and hold the STANDBY button, all connected HDMI CEC devices switch to standby mode simultaneously.
Tip
•The default setting for EasyLink features is on. You can change the default setting, see chapter ‘Adjust settings’ - [ Video Setup ] > [ HDMI Setup ] > [ EasyLink Setup ] for details.
16EN