Ntsc for NTSC-system TV TV Display, HD Jpeg

[ TV System ]

If the video does not appear correctly, change the setting. By default, this setting matches the most common setting for TVs in your country.

•[ PAL ] – for PAL-system TV.

•[ Multi ] – for TV that is compatible with both PAL and NTSC.

•[ NTSC ] – for NTSC-system TV.

Select the screen format according to how you want the picture to appear on the TV.

4:3 Pan Scan (PS)

4:3 Letter Box (LB)

16:9 (Wide Screen)

•[ 4:3 Pan Scan ] – for standard TV, a full-height screen display with the sides trimmed.

•[ 4:3 Letter Box ] – for standard TV, a ‘wide-screen’ display with black bars on the top and bottom.

•[ 16:9 ] – for wide-screen TV (frame ratio 16:9).

[ Progressive ]

If a progressive scan TV is not connected through HDMI cable, turn on progressive scan mode.

•[ On ] – turn on progressive scan mode.

•[ Off ] – disable progressive scan mode.

Tip

• There is more detailed description available. See

chapter ‘Get Started - Turn on Progressive Scan’ for

details.

Select a prede ned set of picture colour settings or customise the personal setting.

•[ Standard ] – original colour setting.

•[ Bright ] – vibrant colour setting.

•[ Soft ] – warm colour setting.

•[ Personal ] – customise the colour setting. Set the level of brightness, contrast, sharpness and colour saturation, then press OK.

[ Component Video ]

Select the video output that matches the video connection between this DVD player and the TV.

•[ Interlaced ] – for component video (Y Pb Pr) connection.

•[ RGB ] – for scart (TV OUT) connection.

Enjoy untouched and uncompressed JPEG pictures at it’s original resolution when you connect this DVD video player and the TV with a HDMI cable.

•[ On ] – display high de nition picture.

•[ Off ] – display standard picture.

Note

•This DVD video player supports the resolution display of 720p and above.

30EN