Philips DVP3360 user manual Digital Output select the type of digital output

[ Analogue Output ]

Select the analogue audio setting based on the audio device that is connected through the analogue audio socket.

•[ Stereo ] – for stereo output.

•[ LT/RT ] – for surround sound output through two speakers.

[ Digital Audio ]

Select the setting based on the digital ampli er/receiver that is connected through the digital socket.

•[ Digital Output ] – select the type of digital output.

Option	Description
[ Off ]	Disable digital output.
[ All ]	The device supports
	multi-channel audio
	formats.

[PCM Only ] The device is not capable of decoding multi-channel audio. Audio is downmixed to two- channel sound: see [ LPCM Output ] setting.

•[ LPCM Output ] – select the LPCM (Linear Pulse Code Modulation) output sampling rate.

Option Description

[48kHz ] For discs recorded at sampling rate of 48 kHz.

[96kHz ] For discs recorded at the sampling rate of 96 kHz.

Note

•[ Digital Audio ] setting is only available if the [ HDMI Audio ] is set to [ Off ].

•[ LPCM Output ] setting is only available if the [ Digital Output ] is set to [ PCM only ].

•The higher the sampling rate, the better the sound quality.

[ HDMI Audio ]

Select the audio output setting when you connect this DVD player and the TV with a HDMI cable.

•[ On ] – audio output through the TV.

•[ Off ] – disable audio output from the TV.

[ Audio Sync ]

Set the default delay time for audio output when you play a video disc.

1.Press OK.

2.Press b B to set the delay time.

3.Press OK to con rm and exit.

[ Volume ]

Set the default volume level when you play

adisc.

1.Press OK.

2.Press b B to set the volume.

3.Press OK to con rm and exit.

28EN