Philips DVP3050V user manual Clock VCR, While the DAY space is flashing, press K or L until

H9821MD_DFU_EN1_0214 2/14/05 11:14 AM Page 20

English

20Clock (VCR)

Follow these steps to set the VCR clock. Make sure:
Press VCR, then press DISC/VCR MENU so MENU
appears. If the clock has never been set, the CLOCK SET
1 menu may appear when you press DISC/VCR MENU. If so,
follow the instructions from step 3 on this page.
2 Press K or L to select CLOCK SET.Then, press B.			1
While the MONTH space is flashing, press K or L
3 until the month appears.Then, press B.
	CLOCK SET		2-9
	MONTH DAY	YEAR
	0 3 / – –	– – – –
	HOUR MINUT	EAM/PM
	– – : – –	– –

While the DAY space is flashing, press K or L until
4 the day appears.Then, press B.
	CLOCK SET
	MONTH DAY	YEAR
0 3 / 2 0		– – – –
	HOUR MINUTE	AM/PM
	– – : – –	– –

		STANDBY-ON
SEARCH	MODE	DISPLAY
REPEAT REPEAT		AUDIO
	A-B
SUBTITLE	ZOOM	ANGLE	SKIP / CH
RETURN	TITLE CLEAR/RESET SLOW			9
VCR	VCR/TV		DVD
DISC/VCR			SYSTEM
MENU			MENU
	OK
STOP	PLAY		PAUSE
TIMER SET	MARKER		RECORD

SPEED

1 2 3

4 5 6 7

8 9 0 +10

While the YEAR space is flashing, press K or L
until the year appears.Then, press B. The day of
5 the week will appear automatically.
	CLOCK SET
	MONTH DAY	YEAR
	0 3 / 2 1 MON	2 0 0 5
	HOUR MINUTE	AM/PM
	– – : – –	– –

6 While the HOUR space is flashing, press K or L until the hour appears.Then, press B.

7 While the MINUTE space is flashing, press K or L until the minute appears.Then, press B.

8 While the AM or PM space is flashing, press K or L to point to AM or PM.

Your selection will flash on the screen in the AM/PM space.

9 Press CLEAR/RESET or B to start the clock.

Helpful Hints

•If the clock has never been set, the CLOCK SET menu may appear when you press DISC/VCR MENU. If so, follow the instructions from step 3 above.

•Press DISPLAY until the time appears on the TV screen.

•Power failures of more than 30 seconds can erase the clock setting.

•To reset the clock, follow steps 1-2. Select the information you want to change using s or B. When the information is flashing, use K or L to enter the correct information. Press CLEAR/RESET to set the clock.