Timer Recording cont’d | Philips DVP3050V specification

H9821MD_DFU_EN1_0214 2/14/05 11:14 AM Page 27

Timer Recording (cont’d) 27

●If you are recording from other equipment, select L1 or L2.To determine L1 or L2, refer to the Helpful Hints.

●If you are using a Cable Box/Satellite Receiver, select the Cable Box/Satellite Receiver output channel (03 or 04). Then, at the Cable Box/Satellite Receiver, select the channel you want to record. Leave the Cable Box/Satellite Receiver on for the timer recording. Details are on page 8.

9 Press K or L to select a recording tape speed. The arrow will appear beside your choice.The selected speed will flash beside REC SPEED. Details about tape speed are on page 58.

ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0 5	/ 0 4 WED
START TIME	0 7	: 3 0	P M
END TIME	0 8	: 3 0	P M
CHANNEL	16
REC SPEED	S P
B	SP
	SLP

10Press CLEAR/RESET to store the timer recording.

11Press TIMER SET. The DVD/VCR will turn off and “” will appear in the display panel. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording.

If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording). When “” appears, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again.

When a timer recording ends

The DVD/VCR will turn off and “” on the DVD/VCR's display panel will flash indicating that the recording is complete. Or it may switch to DVD mode automatically. Press TIMER SETto use the DVD/VCR as usual.

Cancelling Timer Recordings

1 Press VCR, then press DISC/VCR MENU so MENU appears.

2 Press K or L to select TIMER PROGRAMMING, then press B.

3 Press K or L to find the program you want to cancel.

4 While the program number is flashing, press s to clear all the information for that program.

5 Press CLEAR/RESET to remove the menu.

			STANDBY-ON
	SEARCH	MODE	DISPLAY
	REPEAT REPEAT		AUDIO
		A-B
	SUBTITLE	ZOOM	ANGLE	SKIP / CH
	RETURN	TITLE CLEAR/RESET SLOW			10
	VCR	VCR/TV		DVD
	DISC/VCR			SYSTEM
	MENU			MENU	9
		OK			9
11	STOP	PLAY		PAUSE
11	TIMER SET	MARKER		RECORD

SPEED

1 2 3

4 5 6 7

8 9 0 +10

Helpful Hints

•To stop a started timer recording, press STOP/EJECT CA (VCR) on the front of the DVD/VCR. (You cannot stop a started timer recording with STOP C on the remote.) More Helpful Hints are on page 60.

•To change incorrect information, press s or B to choose the item you want to change. Press K or L to adjust the information.

•While a timer recording is set and “ ” is on, pressing STOP/EJECT C A (VCR) will turn on the DVD/VCR and/or cancel the timer recording.The

“ ” will disappear. Press STOP/EJECT C A (VCR) again to remove the tape. Insert a tape and press TIMER SET to reset the timer recording.

•If there is no tape in the VCR when you press TIMER SET,

“ ” will flash. Insert a tape.

•If one or more Timer recordings are on standby when one timer recording ends, the DVD/VCR will turn off automatically and

“ ” will appear on the DVD/VCR's display panel indicating that it is now ready for another timer recording.

Philips DVP3050V Timer Recording cont’d, Cancelling Timer Recordings, When a timer recording ends