Philips DVDR3435V/37 user manual Hints for Timer Recording, Priority of overlapped settings

Page 36

36 Timer Recording (cont’d)

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a recordable disc is not on the tray or an unrecordable disc is on the tray, the “DVD” indicator on the front panel flashes and Timer Recording cannot be performed. In some cases, “DVD” indicator flashes momentarily around the Timer starting time as the unit attempts to record. Please insert a recordable disc.

•If a videotape with a record tab is not in the cassette compartment or there is no videotape in the compartment, the “VCR” indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable videotape.

• If you press [ ] and turn on the unit while either DVD or VCR is in timer standby mode, disappears. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.

•After step 9 on page 34, you can turn on the power to use the side of the unit that is free from Timer Recording (either DVD or VCR) for another recording by pressing [] during timer standby. During Timer Recording, press [SOURCE] on the front panel, or [DVD] or [VCR] on the remote control. Note that you cannot change channels after Timer Recording started. You can use all recording/recording pause/OTR functions. However, the unit will begin receiving channel signals for Timer Recording 2 minutes before the programmed starting time. Unless the program that you are currently recording using the Timer Recording free side of the unit is on the same channel with the one programmed for Timer Recording, the unit prioritizes Timer Recording and the current recording will be automatically stopped. If the channels set for Timer recording and the current recording are same, the current recording will continue without interruption.

•When all the Timer Recording is completed, flashes. To play or eject the recorded disc, press [] first, and then press [PLAY B] or [OPEN/CLOSE A].

•If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Timer Recording. If you want to use functions other than recording under such condition, cancel Timer Recording by pressing [TIMER SET] during timer standby or stop recording by pressing [STOP C] on the front panel during Timer Recording.

•When the starting and ending time are same, the recording will be set for 24 hours. When the disc reaches the end during the recording, the unit turns itself off. If you want to continue the recording, cancel timer standby by pressing [TIMER SET], insert a new disc, and then press [TIMER SET] again. If you are recording on a tape, the unit automatically ejects the tape when it reaches the end. You can continue the recording by inserting a new tape.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [TIMER SET].

•The Timer Recording cannot be performed in DVD and VCR at the same time. If you set two programming with the same channel and time in both units, the program with a lower program number will be recorded.

The priority of overlapped settings

This unit records the programs according to priority if the Timer Programmings are overlapped. The Timer Programming set previously has priority.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped Timer Programmings and change the priority if necessary.

CA programming set previously has priority P When the starting time is the same:

A program set previously (PROG. A) has priority.

PWhen some programming have been made at the end time of the programming currently being recorded:

A program set previously (PROG. B) has priority.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

PROG. A

 

 

PROG. B

 

 

PROG. C

 

 

Actual

PROG. A

PROG. B

recording

The first 30 seconds (at the longest) will be cut off.

CWhen the recording time is partially overlapped: PROG. A will start after PROG. B is complete to be recorded.

PROG. A

PROG. B

 

 

 

 

Actual

 

 

 

 

recording

 

PROG. B

PROG. A

 

 

 

 

The first 30 seconds (at the longest) will be cut off.

CWhen the recording time is entirely overlapped: PROG.A will not be recorded.

PROG. A

 

PROG. B

 

Actual

PROG. B

recording

 

Notes for DVD recording

•When the recording time of two programs are overlapped, or the End time of a program and the Start time of another is the same, the first 30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to one minute or more, this program will be displayed with error number E40 in the Timer Programming list.

CWhen the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG. A is a DVD recording program, the beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

Actual

PROG. A

PROG. B

recording

 

 

The first 30 seconds (at the longest) will be cut off.

E9A90UD_EN.indb 36

6/12/2006 4:21:34 PM

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Digital Video Disc Recorder Precautions Returning the enclosed card guarAntees that your date of purchase Entitled, including special moneyImportant Safety Instructions Precautions cont’dInstallation Location Avoid the Hazards of Electrical Shock and FireMoisture Condensation Warning About CopyrightMaintenance Dolby Digital RecordingTable of contents Features Functional overview Front PanelUnit can also be turned on by pressing these but- tons Rear PanelRemote Control Functional overview cont’dInstalling batteries in the remote control Using a remote controlVCR/DVD recorder switching Keep in mind the following when using the remote controlSetup menus Display menu Press DVD firstPress VCR first Press Display to display the On Screen displayFront Panel Display Guide Connection to a TV MethodBasic Audio Good picture Method Better picture Connection to a TV cont’d Connection to a cable box or satellite boxTo set progressive scan mode, refer to To select channels of the cable box or satellite boxConnection to an Audio System AudioRemote Control Easy DVD recordingInstructions continue on the next Select the input to which the unit is connected on your TVEasy DVD recording cont’d Stop the recordingInitial setting Channel setting Getting channels automaticallyUnit will start getting channels available in your area Channel setting cont’d Press Setup Using K / L, select Channel. Press OKUsing K / L, select Manual Channel Preset. Press OK Adding/deleting channelsGuide channel setting Press Setup Using K / L, select ChannelUsing K / L, select Guide Channel Setting Press OK RememberUsing K / L, select a channel number. Press OK UsingStereoK / L, select Stereo or SAP. Press OK Selecting the TV stereo or SAPSAP Secondary Audio Program Setting the clock Auto Clock SettingSetting will be activated Auto Clock Setting function will be canceledSetting the clock cont’d Manual Clock SettingSetting the Daylight Saving Time Press Setup Using K / L, select Clock. Press OKSelecting the TV aspect ratio If you have a standard TVRecording mode Information on DVD recordingInformation Recordable discInformation on DVD recording cont’d DVD+R FinalizingSetting for Auto Chapter Using K / L, select on or OFF. Press OK Press Setup to exitBefore recording Replacing disc menuBasic recording PressPress DVD first Press OPEN/CLOSE a Press OPEN/CLOSE a to close the disc trayOne-touch Timer Recording You cannot pause a One-touch Timer RecordingRecording will start Timer Recording Timer Recording cont’d Timer Programming list will Each error number meansAppear Press Clear to erase the selected programHints for Timer Recording Priority of overlapped settingsTimer recording using VCR Plus+ system Using K / L, select a title to be overwritten. Press OK Turn on the unitOverwriting an existing title cont’d Overwriting in the middle of the titleHints for Overwriting Settings for an external source Connection to an external sourceVideo If you want to use SV input jack, select S-Video Settings for an external source cont’d Remote control, or Channel L / K on the front panelSelect a recording mode by pressing REC Mode Recording from an external sourceDV dubbing Guide to DV and On-Screen DisplayUsing K / L, then press OK Press Play B to find the point where you wish to beginDV dubbing cont’d DVC to DVD dubbingDVC to VCR dubbing Hints for DV dubbingTo stop recording, press VCR then press Stop C Setting a disc to protect Playing the discs in other DVD playersFinalizing a disc Playing the discs in other DVD players cont’d Finalizing is completedUsing K / L, select Disc Full or End of Timer Rec Auto finalizingDubbing Mode Using K / L, select Dubbing Mode. Press OKMake sure Dubbing Mode cont’d Using K / L, select VCR DVD. Press OKPress Setup to exit. Press DVD first Using K / L, select DVD VCR. Press OKInformation on DVD play Playable discsColor systems Region codesStructure of disc contents Basic playbackPlayback Using K / L, select a desired title. Press OK Basic playback cont’dPress Stop C to stop playback Press OPEN/CLOSE a to open the disc tray Press Play To start playbackWhen selecting the folder Playing MP3, Windows Media Audio, Jpeg discHints for MP3, Windows Media Audio and Jpeg files Playing back a DivX Basic playback contd HintsPlaying discs using the disc menu Playing discs using the title menuSpecial playback PauseResume play Press Play B to resume playSkipping TV commercials during play During playback, press FFW D or REW EDuring playback, press Commercial Skip Press Commercial Skip onceSpecial playback cont’d Rapid playStep by step playback Using K / L, select a desired zoom factor to zoom. Press OK Using K / L / / B, select a desired zoom position. Press OKZoom During playback, press Pause F. Then press FFW D orMarker Setup Using / B, select Press OKMarker setup menu will appear LaterUsing Prev or Next Using DisplaySearch Title/Chapter searchSearch cont’d Track searchTime search Repeat playback Repeat/Random/Program playback/Slide Show cont’d Program playbackSlide Show DivX DivX VODDivX Subtitle Switching subtitles Switching audio soundtrackSelecting the format of audio and video Switching virtual surround system Selecting the format of audio and video cont’dVirtual Surround menu will appear Select Virtual Surround OFF in a case sound is distortedSwitching camera angles Your setting will be activatedDuring playback, press DISPLAY. Display menu will appear Menu will appearEditing discs Setup menu Information on disc editingGuide to a title list Editing discsUsing K / L, select Edit. Press OK. Edit menu will appear Editing discsDeleting titles Press DVD first Press TitleUsing K/ L, select Title Delete. Press OK Editing discs contdTitle list will appear Example DVD+RW/DVD-RW Editing discs cont’d Putting names on titlesFollow steps 1 to 3 on page 73 to display the Edit menu Character setSetting chapter marks Press Play B and then Pause F to decide the pointAt which you will create a new chapter mark It is convenient to use Prev or Next , REW EClearing chapter marks Using K / L, select Current Chapter. Press OK Using Prev or Next , Play B and Pause FUsing K / L, select Hidden. Press OK Editing discs cont’d Hiding chaptersSetting pictures for thumbnails Dividing a title You can divide one title into two new titlesAt which you will divide the title FFW D for finding the point to be dividedEditing discs Setup menu Using K / L, select Edit Disc Name. Press OKPutting name on disc Example DVD-RWEditing discs Setup menu cont’d Setting or releasing disc protectSetting disc to protect Press DVD first Editing discs Setup menu cont’d83 Erasing discMaking edits compatible Tour of the Setup menu Setup Items highlight is the default ContentsLanguage setting Language setting cont’d Display settingDisplay setting cont’d Audio settingAudio setting cont’d When playing disc with copyright protectionDynamic Range Control Default on Video setting Progressive Scan Default OFFUsing K / L, select Still Mode. Press OK Using K / L, select a setting. Press OKSettings for Parental lock level Using K / L, select Parental Lock. Press OKUsing K / L, select the desired level. Press OK Parental Lock Default AllSettings for Parental lock level cont’d Settings for PBC Playback ControlPlayback RecordingRecording and One-touch Timer Recording cont’d One-touch Timer RecordingOther operations Index searchTroubleshooting SETTroubleshooting cont’d Not work Recording Error Parental Lock On100 RF output switch Press TV/VIDEO on the remote controlGlossary Select channel 3 on your TVLanguage code Language CodeFrequently Asked Questions SpecificationsLimited Warranty This Limited Warranty does not coverMeet Philips at the Internet 8239 300

DVDR3435V/37 specifications

The Philips DVDR3435V/37 is a versatile and robust device that combines the capabilities of a DVD recorder with a VCR. This innovative model is designed for those who seek to preserve their favorite shows and movies, providing an easy-to-use solution for capturing and archiving media.

One of the standout features of the DVDR3435V/37 is its dual-format recording capability. Users can effortlessly record video content onto both DVD-R and DVD-RW discs, offering flexibility in choosing the best format for their needs. This dual functionality ensures compatibility with a wide range of DVD players and devices.

The advanced One-Touch Record feature allows users to quickly initiate recording with a single press of a button, making it incredibly user-friendly. Additionally, the model boasts a built-in TV tuner, enabling users to directly record from their favorite television programs without the need for additional equipment. This all-in-one functionality streamlines the recording process, making it more accessible.

Equipped with various recording speeds, including SP (Standard Play) and LP (Long Play), the DVDR3435V/37 offers various options for recording durations. This adaptability allows users to choose between higher quality recordings for short-term projects and longer recordings for extended content, which is ideal for capturing full seasons of shows or lengthy films.

Another notable technology featured in the DVDR3435V/37 is its TimeShift feature. This function allows users to pause live TV and continue watching from where they left off, making it easier to manage viewing schedules. Moreover, the device supports a variety of media formats, allowing for playback of not just DVDs, but also CDs and VCDs, enhancing its versatility.

For connectivity, the Philips DVDR3435V/37 is equipped with composite, S-video, and audio-out connections, ensuring the ability to link the device easily to different setups and home theater systems. This wide range of connectivity options ensures compatibility with various televisions and audio equipment, providing a seamless user experience.

With a sleek design, user-friendly interface, and a focus on functionality, the Philips DVDR3435V/37 is an excellent choice for home entertainment enthusiasts. Its combination of recording flexibility, ease of use, and multimedia support makes it a valuable addition to any home media setup.
Top Page Image Contents