Philips DVD750VR/17 owner manual First-time DVD/VCR Setup, Turn on the TV

Page 17

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 17

First-time DVD/VCR Setup 17

Before turning on your DVD/VCR, make sure batteries are in the remote control and the DVD/VCR and TV are connected correctly. You cannot program channels if you are using a Cable Box or a Satellite Receiver.

These menus may not appear if you have already turned on the DVD/VCR.

1 Turn on the TV. Set it to channel 3 or 4 or its AUDIO/VIDEO IN channel, depending on how you con- nected the DVD/VCR to a TV.

2 Press VCR, then press STANDBY-ON. The green VCR light will appear on the front of the DVD/VCR.The display shown below will appear.

These menus may not appear if you have already turned on the DVD/VCR.You may have turned on the DVD/VCR before to find the Audio/Video In channel of the TV, for example. If so, follow the steps on page 26 to set up chan- nels and page 30 to select a language for the VCR menus.

3 Press o or p to select English, French, or Spanish as the language for VCR on-screen displays and menus. Then, press B.

1 Turn on the TV.

		STANDBY-ON		2
		STANDBY-ON
SEARCH	MODE	DISPLAY
REPEAT	REPEAT	AUDIO
	A-B
SUBTITLE	ZOOM	ANGLE	SKIP / CH
RETURN	TITLE CLEAR/RESET		SLOW
	VCR/TV
DVD			VCR
SYSTEM		DISC/VCR
MENU		MENU

OK 3-4

STOP PLAY PAUSE

TIMER SET VCR Plus+ RECORD

SPEED

1 2 3

4 5 6 7

8 9 0 +10

AUTO SET UP

4 Press B to begin channel programming. AUTO SETUP will flash on the TV screen during the channel search.The DVD/VCR will memorize all available channels. When channel programming is complete, the lowest avail- able channel will appear on the TV.

These channels will be available when you want to watch TV while in VCR mode.To put the DVD/VCR in VCR mode, press VCR so the green VCR light appears. Use the SKIP3/CHo and SKIP /CHp buttons to select memo- rized channels.To select non-memorized channels, use the Number buttons.

Helpful Hints

•To skip this feature and play a tape immediately, insert a tape with its record tab removed.

•To skip step 3, press DISC/VCR/MENU.VCR menus and displays will be in English.

•If you try to program channels when there is no antenna or Cable TV signal connected to the ANT-IN jack of the DVD/VCR, programming will stop. AUTO SET UP will stop flashing. Connect an antenna or Cable TV signal to the DVD/VCR’s ANT-IN jack and press B again.

•Repeat this process if the power fails.

•To stop the Channel Setup while AUTO SET UP is flashing, press DISC/VCR/MENU.

Image 17

Contents Digital Video Disc Player Video Cassette Recorder Model No Serial No Dear Philips product ownerFor Customer Use Declaration of Conformity Safety and General InformationSafety Precautions Table of Contents Introduction Playable Discs Playable Discs and Video CassettesRegion Codes Color SystemsDetermining the best possible connection HookupsBefore you begin RememberDuring playback, press Hookups cont’dVideotape and press Play B to start playback 2DVD/VCR ConnectionsPress VCR/TV on the remote to choose VCR position CableAUDIOBox/SatelliteOUTRF coaxial cable RF coaxial cable Video in Jacks On TV 2Audio Cables 3Video Cable DVD/VCR to a TV that has Component Video In jacks DVD/VCR to a TV that has an S-Video In jack Antenna/Cable TV SignalDVD/VCR to a TV and a Stereo 1Antenna/Cable TV SignalStereo Putting Batteries in the Remote Control Remote Control SetupUsing the Remote Control Recycling Guidelines/Battery SafetyTurn on the TV First-time DVD/VCR SetupRepeat this process if the power fails Video Cassette Playback Other tape playback features are on pagesRead and follow the steps below to play a tape Details are on pagesPress OPEN/CLOSE a Disc PlaybackOn the DVD/VCR 4Insert a DiscDisplay Messages Display Panel DVDDVD Light red DisplayCounter/Clock/Channel Display Panel VCRDisc tray Cassette CompartmentOPEN/CLOSE a Button DVD Front PanelStop C Button DVD Play B Button DVDANT-IN Antenna In jack DVD Audio OUT jacks AC Power CordLeft white and Right red VCR Audio in jacksRemote Control Remote Control cont’d Press o or p to select Channel SET UP.Then Press B Channel SetupPress o or p to select Auto SET UP. Press B Press VCR, then press DISC/VCR/MENU repeatedlyAdding/Deleting Channels Channel Setup cont’dFollow these steps to set the VCR clock. Make sure Clock VCRWhile the Year space is flashing, press o or p until Year appears. Press B. The day of the week willClock VCR cont’d Language VCR Press Display again to remove all the displays Turn on the TV Insert a tape in the DVD/VCR Videotape RecordingRecording Prevention Remote control to select channel 03 or 04 at the TV Use the TV remote control to select the channelPress VCR, then press Record I to record Press VCR/TV once to put the DVD/VCR in TV posiStopping an OTR One-Touch RecordingMake the connections shown above Rerecording Tape DuplicationPress DISC/VCR/MENU so Menu 1 appears Timer RecordingPress o or p to select an empty program.Then Press o or p to select ONCE, DAILY, or WeeklyPress o or p until the month appears Timer Recording cont’dThen, press B Next, press o or p until the day appears.Then Details are on page ninePress o or p to select a recording tape speed. Cancelling Timer RecordingsTo stop recording, press VCR, then press Stop C DVD to Videotape DuplicationStation ChannelsExamine the lists on Press VCR, then press DISC/VCR/MENU until Menu 2 appearsPress o or p to select Guide Channel SET, then Press s to go back one step from the current stepOnce The VCR will record a TV program on any day Press o or p to select a ONCE, DAILY, or WeeklyRecording.Then, press B Press CLEAR/RESET Using s.Then, enter the correct numbers using o or pPress o or p until your desired tape speed appears Example SP There are cases in which the programPress B so on appears next to Auto Repeat Repeat PlayPress o or p to select Auto Repeat Tape Counter Time Search Time Search, Index SearchIndex Search Press VCR, then press Search until the TimeForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Understanding Displays Multi-Channel Television SoundPress DISC/VCR/MENU to remove the menu Multi-Channel Television Sound cont’dPress o or p to select Audio OUT Hi-Fi StereoPress o or p to select HIFI. on will appear beside Hifi Please see additional notes onPress TITLE. The Title menu will appear Using the Title MenuDVD Disc Menus Press Play B to return to normal playback Fast Forward/Reverse SearchDuring playback, press g or h Title/Chapter Playback, Specific Time Playback Enter the Title or Chapter number usingSpecific Title/Chapter Playback Specific Time PlaybackUsing Search Using the Number ButtonsTrack Playback Front of the DVD/VCRPaused and Step-by-Step Playback Paused and Step-by-Step Playback, ResumeResume Press Play B to start playing the Disc from the beginningRepeat Repeat,A-B RepeatPlay or fast forward the Disc to the point at which Repeat againWithin 30 seconds, press s or B to select a Marker MarkersSubtitles Subtitles, Camera AnglesCamera Angles Press DVDPower failure will not erase your password Parental Controls PasswordPress SYSTEM/MENU Press B to select CUSTOM, then press OKParental Levels PasswordPress DVD to put the DVD/VCR in DVD mode. Press the Number buttons to enter your four-digitAudio Language Audio Language, Stereo Sound ModeStereo Sound Mode Slow Motion DVD Slow Motion, ZoomZoom Press Pause F during DVD playbackProgram can have a maximum of 99 Tracks Programmed PlaybackYou cannot alter a Program during playback Random screen appears While playback is stopped, press Mode twice soRandom Playback Press o or p to select a Folder, MP3 Track, or Jpeg File 66 MP3/JPEG PlaybackOr OK To stop playback, press Stop CPress Display again to remove the display MP3/JPEG DisplaysQuick Setup screen will appear When playback is stopped, press SYSTEM/MENUDisplay Press Or B to select display, then press OKPress SYSTEM/MENU to remove the menus Display cont’dWhile playback is stopped, press SYSTEM/MENU LanguageLanguage Codes Language cont’dAudio DVD Displays On-Screen DisplaysPlays during DVD playback Press Display repeatedly to see the following disBlack Level Black Level,Virtual SurroundVirtual Surround Icon will disappear after about 10 secondsCare and Maintenance Cable Box/DBS Output Channel 03 or GlossarySpecifications Remote control will not operate the DVD/VCR DVD/VCR has no powerThere is no picture in DVD mode Helpful HintsHelpful Hints cont’d VCR will not perform a timer recording Power FailureVCR will not record a TV program Number buttons won’t work for TV channels aboveCleaning the Video Heads Line Input modeYou cannot insert a video cassette You cannot remove the tapePhilips, P.O. Box 520890, Miami, FL 33152 402 Limited WarrantyTo obtain a replacement product from Philips Limited Warranty cont’dExchange Fee + Sales Tax = Total Payment, if applicableControls Information Index