Philips DVD750VR/17 Cancelling Timer Recordings, Press o or p to select a recording tape speed

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 38

38 Timer Recording (cont’d)

Press o or p to select a recording tape speed. The
arrow will appear beside your choice.The selected speed
9 will flash beside REC SPEED. Details about tape speed are on
page 76.
ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0 5	/ 0 4	SUN
START TIME	0 7	: 3 0	P M
END TIME	0 8	: 3 0	P M
CHANNEL	1 6
REC SPEED	S P

BSP SLP

10Press CLEAR/RESET to store the timer recording.

11Press TIMER SET. The DVD/VCR will turn off and the red RECORD TIMER light will appear on the front of the DVD/VCR. In some cases, the DVD/VCR will switch to DVD mode instead.You may use the DVD Player during a timer recording.

If you want to use the VCR until time for the recording, don’t press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won’t be using the VCR anymore (until after the recording).When the RECORD TIMER light is on, you cannot put the DVD/VCR in VCR mode by press- ing VCR or SOURCE.You must first press TIMER SET to cancel the timer recording temporarily.Then, you can use the VCR features again.

Cancelling Timer Recordings

1 Press VCR, then press DISC/VCR/MENU.

Press o or p to select TIMER PROGRAMMING,
2 then press B.
Press o or p to find the program you want to
3 cancel.
While the program number is flashing, press s to
4 clear all the information for that program.
ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	05/04	SUN
START TIME	07:30	PM
END TIME	08:30	PM
CHANNEL	16
REC SPEED	SP

5 Press CLEAR/RESET to remove the menu.

			STANDBY-ON
	SEARCH	MODE	DISPLAY
	REPEAT REPEAT		AUDIO
		A-B
	SUBTITLE	ZOOM	ANGLE	SKIP / CH
	RETURN	TITLE CLEAR/RESET SLOW			10
		VCR/TV
	DVD			VCR
	SYSTEM			DISC/VCR
	MENU			MENU	9
		OK
11	STOP	PLAY		PAUSE
	SPEED	1	2	3
	TIMER SET	VCR Plus+		RECORD

Helpful Hints

•If you are recording from other equipment, set CHANNEL to L1 or L2. If you connected the other equipment to the AUDIO and VIDEO In jacks on the front of the DVD/VCR, choose L2. If you con- nected the audio and video cables to the AUDIO IN and VIDEO IN jacks on the back of the DVD/VCR, choose L1.

•To change incorrect information, press s or B to choose the item you want to change. Press o or p to adjust the information.

•If a timer recording is set and the RECORD TIMER light is on, press- ing STOP/EJECT A will turn on the DVD/VCR and/or cancel the timer recording.The RECORD TIMER light will turn off. Press STOP/EJECTA again to remove the tape. Remember to insert a tape and press TIMER SET to reset the timer recording.

•If there is no tape in the VCR when you press TIMER SET, the RECORD TIMER light will flash. Insert a tape.