Philips DVD750VR/17 owner manual Timer Recording cont’d, Press o or p until the month appears

H9420UD(p1-51).QX4 03.7.18 11:59 AM Page 37

5

Timer Recording (cont’d) 37

Press o or p until the month appears.			STANDBY-ON
Then, press B.
Next, press o or p until the day appears.Then,	SEARCH	MODE	DISPLAY
press B. The day of the week will appear. You cannot	REPEAT	REPEAT	AUDIO
record more than one year in advance.		A-B
	SUBTITLE	ZOOM	ANGLE SKIP / CH

6

ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0	5	/ 0 4	SUN
START TIME	– – : – –			– –
END TIME	– – : – –			– –
CHANNEL	– –
REC SPEED	– –

To enter the recording’s start time, press o or p until the hour appears. Press B.

Press o or p until the minute appears. Press B. Finally, press o or p to point to AM or PM. AM or PM will flash beside the start time. Press B.

ONE TIME PROGRAM
PROGRAM NUMBER			1
DATE	0 5	/ 0 4	SUN
START TIME	0 7	: 3 0	P M
END TIME	– – : – –		– –
CHANNEL	– –
REC SPEED	– –		AM
		BPM

RETURN TITLE CLEAR/RESET SLOW

	VCR/TV
DVD	VCR
SYSTEM	DISC/VCR
MENU	MENU

OK

5-8

STOP PLAY PAUSE

TIMER SET VCR Plus+ RECORD

SPEED

1 2 3

4 5 6 7

8 9 0 +10

7 Repeat the procedure in step 6 to set the record- ing’s end time.

8 Press o or p until the channel number appears. Then, press B.

●If you are using a standard antenna/Cable TV hookup (as shown on page eight), select the channel of the TV pro- gram you want to record.

●If you are recording from other equipment, select L1 or L2.To determine L1 or L2, refer to the Helpful Hint on page 38.

●If you are using a Cable Box/Satellite Receiver, select the Cable Box/Satellite Receiver output channel (03 or 04). Then, at the Cable Box/Satellite Receiver, select the channel you want to record. Leave the Cable Box/Satellite Receiver on for the timer recording.

Details are on page nine.

ONE TIME PROGRAM

PROGRAM NUMBER			1
DATE	0 5	/ 0 4	SUN
START TIME	0 7	: 3 0	P M
END TIME	0 8	: 3 0	P M
CHANNEL	16
REC SPEED	– –

Instructions continue on page 38.

Helpful Hints

•Enter the information while the space is flashing.

•To stop a started timer recording, press STOP/EJECT A on the front of the DVD/VCR. (You cannot stop a started timer recording with the STOP C button on the remote.)

•With ShowGuard, if the power fails for more than 30 seconds, pro- grammed timer recordings will be restored when the clock is reset.

More Helpful Hints are on page 80.