Turn on Progressive Scan
Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system).With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
Before you turn on this feature, ensure that:
•TheTV supports progressive scan signals.
•You have connected this unit with the TV through component video.
1Turn on theTV.
2Ensure that the TV progressive scan mode is deactivated (see the TV user manual).
3Switch the TV to the correct viewing channel for this unit.
4Press DISC.
5Press SYSTEM MENU.
6Press 
/
to select [Video Setup Page] in the menu, then press 
.
7Select [Component] > [Pr/Cr Pb/CbY], then press OK / 
.
8Select [TV Mode] > [P - SCAN], then
press OK / 
.
» A warning message is displayed.
9To proceed, select [OK] and press OK /
.
» The progressive setup is complete.
Note
•If a blank/distorted screen is displayed, wait for 15 seconds for auto recovery or turn off progressive scan manually.
10 Turn on the progressive scan mode on the TV.
Turn off progressive scan manually
1Turn off the progressive scan mode on the TV.
2Press SYSTEM MENU to exit the menu.
3Press DISC followed by numeric key “1” to turn off the progressive scan mode on the unit.
»The blue Philips DVD background screen is displayed.
Note
•In the progressive mode, if you press DISC followed by numeric key “1” during normal play, the progressive scan mode will be turned off on the unit.
English
EN 19