Philips MCD388 user manual Program radio stations automatically, Program radio stations manually

7Tune to FM radio stations

1Ensure that you have connected and fully extended the supplied FM antenna (see ‘Connect FM antenna’ on page 15).

2Press TUNER.

3Press and hold/.

4When the frequency indication starts to change, release the button.

»The FM tuner tunes to a station with strong reception automatically.

5Repeat steps 3-4 to tune to more stations. To tune to a weak station:

Press / repeatedly until you fi nd optimal reception.

Program radio stations automatically

Note

•You can program a maximum of 20 preset radio stations.

1 Press / to select a preset number to start programing.

2Press and hold ANGLE/PROG for 2 seconds to activate automatic programming.

»[AUTO] (auto) is displayed briefl y.

»All available stations are programmed in the order of waveband reception strength.

»The last programed radio station is broadcast automatically.

Program radio stations manually

Note

•You can program a maximum of 20 preset radio stations.

1Tune to a radio station.

2Press ANGLE/PROG to activate programming.

3Press / to allocate a number from

1 to 20 to this radio station, then press ANGLE/PROG to confi rm.

»The preset number and the frequency of the preset station are displayed.

4Repeat the above steps to program other stations.

Note

•To overwrite a programmed station, store another station in its place.

Tune to a preset radio station

1Press / to select a preset number that you want.