9 Other features
Activate demonstration mode
You can see an overview of all features.
1In standby mode, press 
on the main unit to activate the demonstration mode.
»A demonstration of major available features starts.
To deactivate the demonstration mode:
1Press 
on the main unit again.
Adjust brightness of display panel
1In standby mode, press MODE/DIM repeatedly to select different levels of brightness for the display panel.
Set the alarm timer
1Ensure that you have set the clock correctly.
2In standby mode, press and hold SLEEP/ TIMER.
»The hour digits are displayed and begin to blink.
3Press +VOL - to set the hour.
»The minute digits are displayed and begin to blink.
4Press +VOL - to set the minute.
5Press SLEEP/TIMER to confi rm.
6To activate the
»A clock icon appears on the display.
»The unit turns on automatically at the set time and switches to the last selected source.
»To deactivate the alarm timer, select [OFF] (off) at step 6.
Set the sleep timer
1When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes).
»The unit turns off automatically after the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player through this unit.
1Slide down SLIDE OPEN
.
2Connect the audio player.
•For audio players with red/white audio output sockets:
Connect a red/white audio cable (not supplied) to the AUX IN L/R sockets and to the audio output sockets on the audio player.
•For audio players with headphone sockets:
30EN