Philips DVP5900 user manual Using Component Video jacks Y Pb Pr, Using an accessory RF modulator

Connections
English
						RF coaxial cable to TV
						2
			COMPONENT
			VIDEO IN
			S-VIDEO				Back of RF Modulator
	AUDIO		IN	V (Pr/Cr)
	IN							(example only)
				U (Pb/Cb)
			VIDEO IN			INT IN	TO TV	VIDEO	AUDIO IN
				Y				IN	R	L
										CH3	CH4
2			1		Antenna or
					Cable TV signal
										1
DIGITAL					DIGITAL
COAXIAL	Cr/Pr		Y		COAXIAL	Cr/Pr		Y
OUT					OUT
AUDIO		CVBS	Cb/Pb		AUDIO		CVBS	Cb/Pb			SCART
	HDMI	VIDEO OUT
OUT					OUT	HDMI	VIDEO OUT

IMPORTANT!

–The progressive scan video quality is only possible when using Y Pb Pr and a progressive scan TV is required.

Using Component Video jacks (Y Pb Pr)

1Use the component video cables (red/ blue/green) to connect the DVD system’s Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Y Pb Pr) on the TV (cable not supplied).

2To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).

3Proceed to page 17 for detailed Progressive Scan set up.

IMPORTANT!

–If your TV only has a single Antenna In jack (or labeled as 75 ohm or RF In,) you will need an RF modulator in order to view the DVD playback on the TV. See your electronics retailer for details on RF modulator availability and operations.

Using an accessory RF modulator

1Use the composite video cable (yellow) to connect the DVD Player’s CVBS jack to the video input jack on the RF modulator.

2Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

10

01-37-DVP5900_Eur3 10 22/09/05, 2:56 PM