Philips DVP5900 user manual Optional Connecting Digital Audio System AV Receiver

				Connections
Optional: Connecting to an				Optional: Connecting Digital				h
Audio System				AV Receiver				lis
								Eng
STEREO
			AUDIO	AV Receiver
			IN		AUDIO
					IN
			DIGITAL			DIGITAL
DIGITAL				DIGITAL
COAXIAL		Cr/Pr	Y	COAXIAL		Cr/Pr	Y
OUT				OUT
AUDIO		CVBS	Cb/Pb	SCAR		CVBS	Cb/Pb
	HDMI	VIDEO OUT		AUDIO
OUT				OUT	HDMI	VIDEO OUT

Stereo system has Dolby Pro Logic or Right / Left Audio In jack

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Use the audio cables (white/red) to connect AUDIO OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the stereo system (cable not supplied).

Receiver has a PCM, Dolby Digital, or MPEG2 decoder

1Select one of the video connections (CVBS VIDEO IN, SCART or COMPONENT VIDEO IN) depending on the options available on your TV.

2Connect the COAXIAL jack of the DVD Player to the corresponding Digital Audio In jack on your Receiver (cable not supplied).

3Set the DVD Player’s Digital Output to PCM or ALL depending on the capabilities of your Receiver (see page 30 “Digital Output”).

Helpful Hint:

– If the audio format of the Digital Output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

13

01-37-DVP5900_Eur3 13 22/09/05, 2:57 PM