Philips DVP632, DVP630 manual Getting Started, To exit from the menu Press System Menu

Page 14
01-36 DVP630_EU_051
14
14
Move to ‘TV Standard’ and press B.
Enter its submenu by pressing OK.
Press 4 3 to select ‘Video Setup Page’.
Press SYSTEM MENU.
1
2
3
4 Use the 1 2 3 4 keys on the Remote Control to navigate in the menu.
MAIN PAGE
MULTI
NTSC
PAL
TV STANDARD TV DISPLAY
CLOSED CAPTIONS
VIDEO OUTPUT
PROGRESSIVE
SMART PICTURE
To deactivate Progressive manually - cont’d
If the progressive function is activated, but your TV does not support progressive function or YPbPr cable is not connected accordingly, there will be a blank screen. You can deactivated progressive function as below:
1 Press STANDBY ON on the front panel to switch on the DVD player.
2 Press OPEN/CLOSE on the front panel to open the disc tray.
3 Press numerical key pad ‘1’.
➜ The blue Philips DVD background appears on the TV screen.
Selecting the colour system that corresponds to your TV
This DVD Player is compatible with both NTSC and PAL. In order for a DVD disc to play on this Player, the colour system of the Disc, the TV and the DVD Player should match.
- - VIDEO SETUP PAGE - -

Getting Started

PAL – Select this if the connected TV is PAL system. It will change the video signal of a NTSC disc and output in PAL format.

NTSC – Select this if the connected TV is NTSC system. It will change the video signal of a PAL disc (VCD only) and output in NTSC format.

Multi – Select this if the connected TV is compatible with both NTSC and PAL (multi-system). The output format will be in accordance with the video signal of the disc.

Helpful Hints:

ÐBefore changing the current TV Standard setting, ensure that your TV supports the Ôselected TV StandardÕ system.

ÐIf there is no proper picture on your TV, wait for 15 seconds for auto recovery.

- - REFER TO THE OWNER'S MANUAL - -

Changing MULTI to PAL

1.Ensure your TV supports PAL

2.If there is a blank screen on normal TV wait 15 seconds for auto recover

OK

1 2 - Move

CANCEL

OK - Select

- - REFER TO THE OWNER'S MANUAL - -

Confirm again to use PAL

If picture is good, press OK button on remote control

OK

TO GO BACK TO MULTI

1.Open tray,

2.Press '3' Key

.

CANCEL

1 2 - Move

OK - Select

To exit from the menu

Press SYSTEM MENU.

/05_8239 210 98393

18/03/2004, 10:04 AM

Page 13 Page 15
Image 14
Page 13 Page 15
Contents DVD Player DVP630 DVP632Important notes for users in the U.K Mains plugKlass 1 laseraparat Environmental Information Laser safetyGeneral Information LaserContents Introduction Supplied accessoriesCare and safety information Connections Using RGB jackUsing Composite Video jacks Cvbs Using S-Video jack Using Component Video jacks Y Pb PrConnecting the power cord Using an accessory RF modulatorReceiver has a PCM, Dolby Digital, or MPEG2 decoder Optional Connecting to an Audio SystemOptional Connecting Digital AV Receiver Functional Overview Front and Rear PanelsRemote Control To deactivate Progressive manually Using the Remote Control toOperate the Player Getting Started To exit from the menu Press System MenuSetting the Audio, Subtitle and Disc menu language Setting language preferenceSetting the OSD Language Region Codes Disc OperationsPlayable Discs Your DVD Player will play DiscsBasic playback controls Using the Disc MenuPlaying discs Play BDVD VCD / Svcd VCD / Svcd / CDIntro Special DVD FeaturesSpecial VCD & Svcd Features DiscExit Playing MP3/DivX/MPEG-4 JPEG/Kodak Picture CDTrack For CDSpecial MP3/JPEG/DivX features DVD Menu Options General Setup menuSmart Power Basic OperationsDivXR VOD Disc Lock DVD/VCD/CDFor VCD / CD Audio Setup Menu Lpcm Output Off, Studio, Movie, Stadium Church, Club18/03/2004,/0510058239AM 210 01-36 DVP630EU051 Smart Picture Activating ProgressivePassword Rating explanationsDefault Specifications Video FormatTroubleshooting Problem SolutionButtons do not work Glossary Visual qualityHotline Meet Philips at the Internet
Top Page Image Contents