Philips DVP632, DVP630 manual Using S-Video jack, Using Component Video jacks Y Pb Pr

							Connections
						COMPONENT
					S-VIDEO	VIDEO IN
				AUDIO	IN	V (Pr/Cr)			COMPONENT
				IN					VIDEO IN
								S-VIDEO
						U (Pb/Cb)		IN	V (Pr/Cr)
								AUDIO
					VIDEO IN			IN
						Y			U (Pb/Cb)
								VIDEO IN
									Y
2			1			2		1
	VIDEO	Pb	Pr
L	OUT						VIDEO	Pb
						L	OUT	Pr
R		Y				R
								Y
			COAXIAL	OPTICAL		RGB
AUDIO OUT	S-VIDEO							COAXIAL	OPTICAL
			DIGITAL OUT				S-VIDEO
	OUT					AUDIO OUT		DIGITAL OUT
							OUT

IMPORTANT!

–S-Video connection provides

better picture quality.This option must be available on your TV.

Using S-Video jack

1Use the S-video cable to connect the DVD system’s S-VIDEO OUT jack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV (cable not supplied).

2To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).

IMPORTANT!

–Component Video connection provides higher picture quality. This option must be available on your TV.

–The progressive scan video quality is only possible through Component Video (Y Pb Pr) output.

Using Component Video jacks (Y Pb Pr)

1Use the component video cables (red/ blue/green) to connect the DVD system’s Y Pb Pr jacks to the corresponding Component video input jacks (or labeled as Pr/Cr Pb/Cb Y) on the TV (cable not supplied).

2To hear the sound of this DVD Player through your TV, use the audio cables (white/red) to connect AUDIO OUT (L/ R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV (cable not supplied).

8

01-36 DVP630_EU_051	8	/05_8239 210 98393
		18/03/2004, 10:04 AM