Philips DVP630, DVP632 manual Troubleshooting, Problem Solution

Page 33

Troubleshooting

WARNING

Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem

Solution

No power

Check if the AC power cord is properly connected.

 

Press the STANDBY ON on the front of the DVD

 

 

system to turn on the power.

No picture

Refer to your TV’s manual for correct Video In

 

 

channel selection. Change the TV channel until you

 

 

see the DVD screen.

 

– Check if the TV is switched on.

Distorted picture

Sometimes a small amount of picture distortion may

 

 

appear depending on the disc being played back.This

 

 

is not a malfunction.

Completely distorted picture or

Connect DVD Player directly to the TV.

black/white picture with DVD

Make sure the disc is compatible with the DVD/

 

 

Player.

 

– Ensure that the DVD Player’s TV Standard is set to

 

 

match that of the Disc and your TV.

No sound or distorted sound

Adjust the volume.

 

Check that the speakers are connected correctly.

No audio at digital output

Check the digital connections.

 

Check if your receiver can decode MPEG-2 or DTS

 

 

and if not, please make sure the digital output is set

 

 

to PCM.

 

Check if the audio format of the selected audio

 

 

language matches your receiver capabilities.

No sound and picture

Check that the RGB/SCART cable is connected to

 

 

the correct device (See Connecting TV).

Disc can’t be played

The DVD+R/CD-R must be finalised.

 

Ensure the disc label is facing up.

 

Check if the disc is defective by trying another disc.

 

If you have recorded a Picture CD or MP3 CD

 

 

yourself, ensure that your disc contains at least 10

 

 

pictures or 5 MP3 tracks.

 

Region code incorrect.

Picture freezes momentarily

Check the disc for fingerprints/scratches and

during playback

 

clean with a soft cloth wiping from centre to edge.

No return to start-up screen when

Reset the unit by switching the player off, then on

disc is removed

 

again.

 

 

 

33

01-36 DVP630_EU_051

33

18/03/2004,/0510:05_8239AM 210 98393

Image 33
Contents DVP630 DVP632 DVD PlayerMains plug Important notes for users in the U.KKlass 1 laseraparat General Information Laser safetyEnvironmental Information LaserContents Supplied accessories Care and safety informationIntroduction Using RGB jack Using Composite Video jacks CvbsConnections Using Component Video jacks Y Pb Pr Using S-Video jackUsing an accessory RF modulator Connecting the power cordOptional Connecting to an Audio System Optional Connecting Digital AV ReceiverReceiver has a PCM, Dolby Digital, or MPEG2 decoder Front and Rear Panels Functional OverviewRemote Control Using the Remote Control to Operate the PlayerTo deactivate Progressive manually To exit from the menu Press System Menu Getting StartedSetting language preference Setting the OSD LanguageSetting the Audio, Subtitle and Disc menu language Playable Discs Disc OperationsRegion Codes Your DVD Player will play DiscsPlaying discs Using the Disc MenuBasic playback controls Play BDVD VCD / Svcd / CD VCD / SvcdSpecial VCD & Svcd Features Special DVD FeaturesIntro DiscTrack Playing MP3/DivX/MPEG-4 JPEG/Kodak Picture CDExit For CDSpecial MP3/JPEG/DivX features Smart Power General Setup menuDVD Menu Options Basic OperationsDisc Lock DVD/VCD/CD For VCD / CDDivXR VOD Audio Setup Menu Off, Studio, Movie, Stadium Church, Club Lpcm Output18/03/2004,/0510058239AM 210 01-36 DVP630EU051 Activating Progressive Smart PictureRating explanations PasswordDefault Video Format SpecificationsProblem Solution TroubleshootingButtons do not work Visual quality GlossaryMeet Philips at the Internet Hotline