Philips DVP620VR manual How to check, correct or delete Programmed recording Timer

H9723AD(EN).qx3 04.6.25 3:28 PM Page 12

Programming a Recording (TIMER) Other Functions

How to check, correct or delete

a programmed recording (TIMER)

1Press TIMER SET.

•If the DVD/VCR’s power is off, press STANDBY-ONy instead of TIMER SET, then go to the next step.

2Repeat steps 1 to 3 in the “Programming a Recording” section.

3Select the timer block number you want to check by pressing K/L.

•The details of the selected timer block appears on the TV screen.

•Go to the digit you want to change by pressing s / B.Then, enter correct numbers by pressing K/L.

•You may cancel the entire programme by pressing s while the timer block number flashes.

4Press MENU to exit.

5Press TIMER SET to return to timer stand-by mode.

Hint for Timer Recording

•If there is a power failure or the DVD/VCR is unplugged for more than 1 minute, the clock setting and all timer settings will be lost.

•If a tape ends during TIMER RECORDING, the DVD/VCR will

stop, eject the tape, and switch to the DVD mode automatically as ‘ ’ blinks. (If the DVD power is off, the DVD/VCR will become the STANDBY status.)

•If a tape is not in the DVD/VCR or does not have a record tab,‘ ’ flashes and timer recording will not operate. Please insert a recordable tape.

•When timer recordings are set,‘ ’ will come on.To use the DVD/VCR as usual until the time for the recording, press TIMER SET so that ‘ ’ disappears. Press VCR to choose VCR mode, then continue with the other features as described in this manual.

Note:

-When all the programmed recording are finished, ‘ ’ will flash.

This is not a malfunction.

To use the DVD/VCR, press TIMER SET to turn off ‘ ’.

How to use the DVD player during a VCR timer recording or while ‘ ’ is on or flashes.

•You can use the DVD player while ‘ ’ is on or flashes, or during a timer recording. Press STANDBY-ONy to turn on the DVD player. Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual.You don’t have to set the TIMER off to use the DVD only.

How to stop timer programme already started

•Press STOP/EJECT CA on the DVD/VCR.

To avoid overlap of timer programmes

•A timer programme will not work whilst another programme is under execution.

Programme 1

Programme 2

Programme 3

9:00 10:00 11:00

Selecting the sound channel

This DVD/VCR will record and playback Hi-Fi stereo sound. In addition it has a NICAM/A2 stereo sound decoder.

This equipment will receive stereo and bilingual broadcasts and there are several ways of recording and playing back the sound. You can select each mode by pressing AUDIO on the remote control. Each mode is indicated on the TV screen as following.

• Reception of stereo broadcasts:

Mode	AUDIO OUTPUT		Display on
			the TV screen
Stereo	L	L Audio	STEREO
	R	R Audio
L	L	L Audio	LEFT
	R	L Audio
R	L	R Audio	RIGHT
	R	R Audio
Monaural	L	L+ R Audio	NONE
	R	L+ R Audio

• During playback of the recorded tape in Hi-Fi mode:

Mode	AUDIO OUTPUT			Display on
			the TV screen
Stereo	L	Hi Fi L Audio		STEREO
	R	Hi Fi R Audio
L	L	Hi Fi L Audio		LEFT
	R	Hi Fi L Audio
R	L	Hi Fi R Audio		RIGHT
	R	Hi Fi R Audio
MONO	L	Normal Audio		NONE
	R	Normal Audio
• During reception of bilingual broadcasts:
Mode	AUDIO OUTPUT			Display on
				the TV screen
MAIN	L	Main Audio		MAIN
	R	Main Audio
SUB	L	Sub Audio		SUB
	R	Sub Audio
MAIN	L	Main Audio		MAIN
SUB	R	Sub Audio		SUB

Notes:

–If you play non-Hi-Fi tapes, the DVD/VCR will play auto- matically in monaural regardless of the mode you select.

–If the stereo signal becomes weak, the broadcast is auto- matically recorded in monaural.

12