Philips HSB3280/F7 Install remote control batteries, Set clock, Close the battery compartment

Page 17

3Connect the other end to the wall outlet.

4Connect the power plug of the digital wireless subwoofer to the wall outlet.

Install remote control batteries

Caution

•Risk of explosion! Keep batteries away from heat, sunshine or ﬁ re. Never discard batteries in ﬁ re.

•Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate.

For ﬁ rst-time use:

1Remove the protective tab to activate the remote control battery.

To replace the remote control battery:

1Open the battery compartment.

2Insert one lithium CR2025 battery with correct polarity (+/-) as indicated.

3Close the battery compartment.

Note

•Before pressing any function button on the remote control, ﬁ rst select the correct source with the remote control instead of the main unit.

•If you are not going to use the remote control for a long time, remove the battery.

Set clock

1In the standby mode, press and hold SET TIME/PROG to enter the clock setting mode.

»The hour digits are displayed and begin to blink.

»If the hour digits are not displayed, press and hold for more than 2 seconds to switch to standby mode, then repeat step 1.

2Press +VOL - to set the hour.

»The minute digits are displayed and begin to blink.

3 Press +VOL - to set the minute.

18EN

Image 17

Contents Manual del usuario Mode d’emploi English USA, Inc. P.O. Box 672768, Marietta, GA Contents Important Safety Instructions Important safety instructionsAmes or heat For USAFor Canada RecyclingReorient or relocate the receiving antenna What’s in the box IntroductionOverview of the main unit PowerEnable/disable automatic on/standby Overview of the remote control Select the AV input source from the Audio in Coaxial socket Attach speakers to the main unit Get startedAttach the stand Insert a supplied stud into the holeOption 1 Connect this soundbar to devices through theTV Connect AV devicesConnect the AV devices directly to the soundbar Game console Connect the AV devices directly to the soundbar DVD player Connect FM antenna Connect powerConnect the supplied FM antenna to the FM Antenna socket Connect one end to the DC in socket on the main unitClose the battery compartment Install remote control batteriesSet clock Connect the other end to the wall outletSet up wireless connection manually Switch to standby modePress SETTIME/PROG to conﬁ rm the clock setting Turn onPlay an AV source through this soundbar PlayPlay from USB Press OK / to start playControl USB play Adjust volume level Adjust volume level and sound effectSelect a sound effect Mute soundPress PRESET/ALB/ to select a preset number that you want Tune to a preset radio stationProgram radio stations automatically Program radio stations ManuallyPress Learn to exit the learning mode Program remote controlPress Setup to activate the renaming mode Rename an AV sourceSet the alarm timer Enable/disable automatic on/ standbySet the sleep timer To disableProduct information USB playability information Remote control does not work TroubleshootingReplace the battery Fully extend the FM antennaMount to a wall AppendixWhat’s in the supplied mounting kit What else you’ll need30 ES Hook the main unit and speakers in place