Philips HSB3280/F7 user manual Program remote control, Rename an AV source

Page 23

8Use more of your soundbar

Program remote control

You can store a total of 12 most frequently used functions of other AV devices in the smart remote control.This feature allows you to use only one remote control to operate all of your AV devices.

By default, the remote control codes of a Philips TV are stored in the smart remote control.The available preset buttons are POWER, AV,CH , VOL, MUTE and SLEEP.

1Place the smart remote control (A) within 1mm-10mm distance from the other remote control (B).

B

A (HSB3280)

2Press LEARN for 2 seconds to activate the learning mode.

»A blue indicator on the smart remote control (A) lights up.

3Press the button on the other remote control (B) that is to be stored on the smart remote control (A).

»If the code is received successfully, the blue indicator ﬂ ashes.

4Press one of the white learning buttons on the smart remote control (A) to store the code of this button.

»If the code is stored successfully, the indicator ﬂ ashes green for 2 seconds, then turns blue again.

5Repeat steps 3 and 4 to program more buttons on the smart remote control (A).

6Press LEARN to exit the learning mode.

Note

•During the learning process, the normal remote control functions are disabled.

Rename an AV source

1Press AV 1, AV 2, AV FRONT or COAX to select an AV source you want to rename.

»The default name of the selected sound source is displayed.

2Press SETUP to activate the renaming mode.

»The default name of the selected sound source ﬂ ashes for 4 seconds.

3Within 2 seconds, press PRESET/ALB/

to select a name that matches the AV device connected with the current socket from:

•[TV]

•[DVD]

•[GAME] (game)

•[SETTOP BOX] (set top box)

•[CABLE] (cable)

•[SATELLITE] (satellite)

24EN

Image 23

Contents Manual del usuario Mode d’emploi English USA, Inc. P.O. Box 672768, Marietta, GA Contents Important Safety Instructions Important safety instructionsAmes or heat For USAFor Canada RecyclingReorient or relocate the receiving antenna What’s in the box IntroductionOverview of the main unit PowerEnable/disable automatic on/standby Overview of the remote control Select the AV input source from the Audio in Coaxial socket Insert a supplied stud into the hole Get startedAttach speakers to the main unit Attach the standOption 1 Connect this soundbar to devices through theTV Connect AV devicesConnect the AV devices directly to the soundbar Game console Connect the AV devices directly to the soundbar DVD player Connect one end to the DC in socket on the main unit Connect powerConnect FM antenna Connect the supplied FM antenna to the FM Antenna socketConnect the other end to the wall outlet Install remote control batteriesClose the battery compartment Set clockTurn on Switch to standby modeSet up wireless connection manually Press SETTIME/PROG to conﬁ rm the clock settingPress OK / to start play PlayPlay an AV source through this soundbar Play from USBControl USB play Mute sound Adjust volume level and sound effectAdjust volume level Select a sound effectProgram radio stations Manually Tune to a preset radio stationPress PRESET/ALB/ to select a preset number that you want Program radio stations automaticallyRename an AV source Program remote controlPress Learn to exit the learning mode Press Setup to activate the renaming modeTo disable Enable/disable automatic on/ standbySet the alarm timer Set the sleep timerProduct information USB playability information Fully extend the FM antenna TroubleshootingRemote control does not work Replace the batteryWhat else you’ll need AppendixMount to a wall What’s in the supplied mounting kit30 ES Hook the main unit and speakers in place