Philips HSB3280/F7 Enable/disable automatic on/ standby, Set the alarm timer, Set the sleep timer

Page 24

Enable/disable automatic on/ standby

This feature only applies to AV devices or TV with audio connection to the soundbar. The soundbar can detect the state of AV devices that are connected through the audio connectors.

When automatic on/standby is enabled:

•If an AV device turns on, the soundbar turns on automatically.

To enable

When the soundbar is turned on, press and hold SOURCE on the front panel for more than 2 seconds.

To disable

1When the soundbar is turned on, press and hold SOURCE on the front panel for more than 2 seconds again.

Set the alarm timer

1Ensure that you have set the clock correctly.

2In standby mode, press and hold TIMER.

»The hour digits are displayed and begin to blink.

3Press +VOL - to set the hour.

»The minute digits are displayed and begin to blink.

4Press +VOL - to set the minute.

5Press TIMER to conﬁ rm.

6To activate the wake-up timer, press +VOL - to select [ON] (on).

»A clock icon appears on the display.

»The soundbar turns on automatically at the set time and switches to the last selected source.

•To deactivate the alarm timer, select [OFF] (off) at step 6.

Set the sleep timer

1When the soundbar is turned on, press SLEEP repeatedly to select a set period of time (in minutes).

»The soundbar turns off automaticaly after the set period of time.

English

EN 25

Image 24

Contents Manual del usuario Mode d’emploi English USA, Inc. P.O. Box 672768, Marietta, GA Contents Important safety instructions Important Safety InstructionsFor USA Ames or heatRecycling Reorient or relocate the receiving antennaFor Canada Introduction What’s in the boxPower Enable/disable automatic on/standbyOverview of the main unit Overview of the remote control Select the AV input source from the Audio in Coaxial socket Get started Attach speakers to the main unitAttach the stand Insert a supplied stud into the holeConnect AV devices Option 1 Connect this soundbar to devices through theTVConnect the AV devices directly to the soundbar Game console Connect the AV devices directly to the soundbar DVD player Connect power Connect FM antennaConnect the supplied FM antenna to the FM Antenna socket Connect one end to the DC in socket on the main unitInstall remote control batteries Close the battery compartmentSet clock Connect the other end to the wall outletSwitch to standby mode Set up wireless connection manuallyPress SETTIME/PROG to conﬁ rm the clock setting Turn onPlay Play an AV source through this soundbarPlay from USB Press OK / to start playControl USB play Adjust volume level and sound effect Adjust volume levelSelect a sound effect Mute soundTune to a preset radio station Press PRESET/ALB/ to select a preset number that you wantProgram radio stations automatically Program radio stations ManuallyProgram remote control Press Learn to exit the learning modePress Setup to activate the renaming mode Rename an AV sourceEnable/disable automatic on/ standby Set the alarm timerSet the sleep timer To disableProduct information USB playability information Troubleshooting Remote control does not workReplace the battery Fully extend the FM antennaAppendix Mount to a wallWhat’s in the supplied mounting kit What else you’ll needHook the main unit and speakers in place 30 ES