Sony HCD-MD373 Flexible Circuit Board Repairing, Aep, Uk, Hk, Sp, My, Ar, Aus, Kr, Je

Laser component in this product is capable of emitting radiation exceeding the limit for Class 1.

This appliance is classified as a CLASS 1 LASER product. The CLASS 1 LASER PROD- UCT MARKING is located on the rear exterior.

MODEL IDENTIFICATION

— BACK PANEL —

Parts No.

This caution label is located inside the unit.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous ra- diation exposure.

Notes on chip component replacement

•Never reuse a disconnected chip component.

•Notice that the minus side of a tantalum capacitor may be damaged by heat.

Flexible Circuit Board Repairing

•Keep the temperature of soldering iron around 270˚C during repairing.

•Do not touch the soldering iron on the same conductor of the circuit board (within 3 times).

•Be careful not to apply force on the conductor when soldering or unsoldering.

PARTS No.		MODEL
4-221-082-1π		AEP, UK
4-221-082-3π		HK, SP, MY, AR, AUS, KR, JE
4-221-082-4π		CH
• Abbreviation
HK	: Hong Kong model
SP	: Singapore model
MY	: Malaysia model
AR	: Argentine model
AUS	: Australian model
KR	: Korea model
CH	: Chinese model
JE	: Tourist model

SAFETY-RELATED COMPONENT WARNING !!

COMPONENTS IDENTIFIED BY MARK !OR DOTTED LINE WITH MARK !ON THE SCHEMATIC DIAGRAMS AND IN

THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.

4