Getting Started
1In disc mode, stop playback then press
SYSTEM MENU.
➜ The menu bar will appear across the top of the TV screen.
2Select 
icon and press 4.
3Press à / á / 4 / 3 keys on the remote control to navigate in the menu.
➜Move to 
, and press á.
➜Move to “TV TYPE” , and press á.
MULTI
–Select this if the connected TV set is compatible with both NTSC and PAL (multi system).The output format will be consistent wit the video signal of the disc.
NTSC
–Select this if the connected TV set is NTSC system. It will change the video signal of a PAL video disc and output to NTSC system.
PAL
–Select this if the connected TV set is PAL system. It will change the video signal of an NTSC disc and output to PAL format.
4Select an item and press OK.
➜ The screen messages for further setting confirmation may appear. Follow the
To remove the menu
Press SYSTEM MENU.
Setting up Progressive Scan feature (for
Progressive Scan TV only)
The progressive scan display twice the number of frames per seconds than interlaced scanning (ordinary normal TV system).With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
IMPORTANT!
Before enabling the progressive scan feature, you must ensure:
1)Your TV can accept progressive signals, a progressive scan TV is required.
2)You have connected the DVD player to your TV using Y Pb Pr (see “Connecting TV set”)
1Turn on your TV.
2Turn off your TV progressive scan mode or turn on interlaced mode (refer to your TV user manual).
3Press
4Select the correct Video Input channel.
5Press SYSTEM MENU on the remote control. ➜ The menu bar will appear across the top of the TV screen.
6Select icon 
and press 4. ➜ Playback will pause.
PBC
TV SHAPE
TV SYSTEM
PROGRESSIVE 
OFF
ON
SCR SAVER
PROGRESSIVE NOW ON
7Press à / á / 4 / 3 keys on the remote control to navigate in the menu.
➜Move to 
, and press á.
➜Move to “PROGRESSIVE” , and press á.
➜Move to “ON”, and press OK.
➜The screen message below appears on the
TV.
ACTIVATING PROGRESSIVE SCAN
1.ENSURE YOUR TV HAS PROGRESSIVE SCAN.
2.CONNECT USING YPRPB(RGB) VIDEO CABLES
3.IF THERE IS A BLANK SCREEN, WAIT FOR 15 SECONDS FOR AUTO RECOVER.
8Press à / á to highlight OK in the menu and press OK on the remote to confirm.
➜ The screen message for further progressive scan setting confirmation will appear.
There will be a distorted picture on your TV at this state until you turn on the progressive scan mode on your TV.
9Turn on your TV progressive scan mode (refer to your TV user manual).
0In the confirmation menu, press à / á to highlight OK in the menu and press OK on the remote to confirm.
English
15