Philips MCD129/93 manual English Using S-Video In jack, Using an accessory RF modulator

Page 8

Connections

English

Using S-Video In jack

ANTENNA

FM

(75Ω)

●Use the S-Video cable (not supplied) to connect the system’s S-VIDEOjack to the S-Video input jack (or labeled as Y/C or S-VHS) on the TV set.

●To listen to TV channels through this system, use the audio cables (white/red, not supplied) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV set.

Or, to listen to disc playback of the system through the TV, use the audio cables (white/red, not supplied) to connect LINE OUT (L/R) jacks to the corresponding AUDIO IN jacks on the TV set.

Using an accessory RF modulator

IMPORTANT!

–If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.

ANTENNA FM

(75Ω)

●Use the supplied composite cable (yellow) to connect the system’s COMPOSITE VIDEO jack to the video input jack on the RF modulator.

●Use the RF coaxial cable (not supplied) to connect the RF modulator to your TV’s RF jack.

8

Image 8

Contents DVD Micro Theatre Page Index EnglishContents Features Supplied accessoriesMaintenance of disc and disc lens General InformationConnecting speakers and subwoofer ConnectionsPlacing speakers Type plate is located on the bottom of the systemConnecting TV set Using Video In jack CvbsEnglish Using S-Video In jack Using an accessory RF modulatorConnecting the power cord Connecting a VCR or cable/satellite boxEnglish Using the VCR for recording DVDs Viewing and listening to playbackConnecting digital audio equipment Recording digitalFunctional Overview Controls on the systemRemote control Mute ¡ GotoZoom £ DSCUsing Remote Control Setting up the TVUsing the Remote Control to operate Player Getting StartedMulti NtscPAL To remove the menu Press System MenuSetting language preference Setting the OSD LanguageSetting the Audio, Subtitle and Disc Menu language To deactivate Progressive manuallySwitching the system on/off Power saving automatic standbyVolume control Basic OperationsDisc Operations Region CodesPlayable Discs WMA-CDs CD-ROMs with WMA tracks Picture Jpeg files on CD-RWUsing the Disc Menu Using PBC feature available for 2.0-version VCD onlyPlaying discs Resuming playbackEnglish Fast forwarding/reversing Repeat A-BPlaying in slow motion Programming favourite tracksDisplay information Subtitle DVD only Camera Angle DVD onlyPlaying a Title DVD only If the MP3-CD menu is switched off Playing MP3/WMA/JPEG picture discPlaying Kodak picture disc Title number will appearDVD Menu Operations Using the menu barYou enter Setup MENU, the playback will pause Using the setup menu user preference settings TV Display default Normal/PSThis menu is accessible only in the stop postion Screen Saver default OnEnglish Night Mode Test Tone Changing the passwordOFF Use the numeric keys 0-9 to enter your four-digit codeRestricting playback by setting parental Level DefaultRating explanations OSD language menu languageSpecifications Troubleshooting English ProblemSolution Clean the discOn the remote to resume normal play mode Micro DVD player does not start playbackTroubleshooting Glossary