Philips MCD129/93 manual Connections, Placing speakers, Connecting speakers and subwoofer

Page 6

Connections

English

Step 1: Placing speakers and

subwoofer

Step 2: Connecting speakers and subwoofer

ANTENNA

FM

(75Ω)

For best possible surround sound, locate your speakers and subwoofer as follows:

●Place the left and right speakers at equal distances from the TV set and at an angle of approximately 45 degrees from the listening position.

●Place the subwoofer on the floor near the TV set.

Notes:

–To avoid magnetic interference, do not position the left and right speakers too close to your TV set.

–Allow adequate ventilation around the DVD System.

IMPORTANT!

The type plate is located on the bottom of the system.

To avoid overheating of the system, a safety circuit has been built in. Therefore, your system may switch to Standby mode automatically under extreme conditions. If this happens, let the system cool down before reusing it.

●Connect the supplied DIN cable to DVD player’s DIN jack and the left speaker’s DIN jack.

●Connect the supplied speaker wires of the right speaker to SPEAKER RIGHT on the left speaker, red wire to red jack ( “+” ), black wire to black jack ( “-“ ). Fully insert the stripped portion of the speaker wire into the terminal as shown.

●Connect the supplied speaker wire of the subwoofer to SUBWOOFER OUT on the left speaker, green wire to green jack ( “+” ), white wire to white jack ( “-” ).

●Connect the supplied AC power cord to AC MAINS of the left speaker and the wall socket.

Notes:

–For optimal sound performance, use the supplied speakers.

–Do not connect more than one speaker to any one pair of +/- speaker terminals.

–Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

6

Image 6

Contents DVD Micro Theatre Page Index EnglishContents Maintenance of disc and disc lens FeaturesSupplied accessories General InformationPlacing speakers Connecting speakers and subwooferConnections Type plate is located on the bottom of the systemConnecting TV set Using Video In jack CvbsEnglish Using S-Video In jack Using an accessory RF modulatorEnglish Using the VCR for recording DVDs Connecting the power cordConnecting a VCR or cable/satellite box Viewing and listening to playbackConnecting digital audio equipment Recording digitalFunctional Overview Controls on the systemRemote control Zoom Mute¡ Goto £ DSCUsing the Remote Control to operate Player Using Remote ControlSetting up the TV Getting StartedPAL MultiNtsc To remove the menu Press System MenuSetting the Audio, Subtitle and Disc Menu language Setting language preferenceSetting the OSD Language To deactivate Progressive manuallyVolume control Switching the system on/offPower saving automatic standby Basic OperationsPlayable Discs Disc OperationsRegion Codes WMA-CDs CD-ROMs with WMA tracks Picture Jpeg files on CD-RWPlaying discs Using the Disc MenuUsing PBC feature available for 2.0-version VCD only Resuming playbackEnglish Fast forwarding/reversing Repeat A-BProgramming favourite tracks Display informationPlaying in slow motion Camera Angle DVD only Playing a Title DVD onlySubtitle DVD only Playing Kodak picture disc If the MP3-CD menu is switched offPlaying MP3/WMA/JPEG picture disc Title number will appearUsing the menu bar You enter Setup MENU, the playback will pauseDVD Menu Operations This menu is accessible only in the stop postion Using the setup menu user preference settingsTV Display default Normal/PS Screen Saver default OnOFF English Night ModeTest Tone Changing the password Use the numeric keys 0-9 to enter your four-digit codeRating explanations Restricting playback by setting parental LevelDefault OSD language menu languageSpecifications Solution TroubleshootingEnglish Problem Clean the discOn the remote to resume normal play mode Micro DVD player does not start playbackTroubleshooting Glossary