3 Connect
Preparations
1 Place a soft cloth on a hard, flat, stable surface.
2 Place the unit onto the cloth.
3 Remove the socket cover.
Connect speakers
Note
•Insert the stripped portion of each speaker wire into the socket completely.
•Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual.
To insert each speaker wire: Hold down the socket flap. Insert the speaker wire fully. Release the socket flap.
1 For the right speaker, find the sockets on the main unit marked ‘RIGHT’.
2 Insert the red wire to the red (+) socket.
3 Insert the black wire into the black
4 For the left speaker, find the sockets on the main unit marked ‘LEFT’.
5 Repeat steps
Connect audio cables
To hear audio from other audio devices as well as the DVD Micro Theater speakers, select a preferred audio connection:
•Option 1: connect a coaxial cable
•Option 2: connect analog audio cables
•Option 3: connect a headphone
E n g l i s h
EN 11